|
| 1 | +# Google Android makefile for curl and libcurl |
| 2 | +# |
| 3 | +# Place the curl source (including this makefile) into external/curl/ in the |
| 4 | +# Android source tree. Then build them with 'make curl' or just 'make libcurl' |
| 5 | +# from the Android root. Tested with Android versions 1.5, 2.1-2.3 |
| 6 | +# |
| 7 | +# Note: you must first create a curl_config.h file by running configure in the |
| 8 | +# Android environment. The only way I've found to do this is tricky. Perform a |
| 9 | +# normal Android build with libcurl in the source tree, providing the target |
| 10 | +# "showcommands" to make. The build will eventually fail (because curl_config.h |
| 11 | +# doesn't exist yet), but the compiler commands used to build curl will be |
| 12 | +# shown. Now, from the external/curl/ directory, run curl's normal configure |
| 13 | +# command with flags that match what Android itself uses. This will mean |
| 14 | +# putting the compiler directory into the PATH, putting the -I, -isystem and |
| 15 | +# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options |
| 16 | +# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the |
| 17 | +# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o. |
| 18 | +# Remember that the paths must be absolute since you will not be running |
| 19 | +# configure from the same directory as the Android make. The normal |
| 20 | +# cross-compiler options must also be set. Note that the -c, -o, -MD and |
| 21 | +# similar flags must not be set. |
| 22 | +# |
| 23 | +# To see all the LIBS options, you'll need to do the "showcommands" trick on an |
| 24 | +# executable that's already buildable and watch what flags Android uses to link |
| 25 | +# it (dhcpcd is a good choice to watch). You'll also want to add -L options to |
| 26 | +# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/ |
| 27 | +# directories so that additional libraries can be found and used by curl. |
| 28 | +# |
| 29 | +# The end result will be a configure command that looks something like this |
| 30 | +# (the environment variable A is set to the Android root path which makes the |
| 31 | +# command shorter): |
| 32 | +# |
| 33 | +# A=`realpath ../..` && \ |
| 34 | +# PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \ |
| 35 | +# ./configure --host=arm-linux CC=arm-eabi-gcc \ |
| 36 | +# CPPFLAGS="-I $A/system/core/include ..." \ |
| 37 | +# CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \ |
| 38 | +# LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\ |
| 39 | +# /interwork/libgcc.a ..." |
| 40 | +# |
| 41 | +# Finally, copy the file COPYING to NOTICE so that the curl license gets put |
| 42 | +# into the right place (but see the note about this below). |
| 43 | +# |
| 44 | +# Dan Fandrich |
| 45 | +# November 2011 |
| 46 | + |
| 47 | +LOCAL_PATH:= $(call my-dir) |
| 48 | + |
| 49 | +common_CFLAGS := -Wpointer-arith -Wwrite-strings -Wunused -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wfloat-equal -Wno-multichar -Wsign-compare -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wno-system-headers -DHAVE_CONFIG_H |
| 50 | + |
| 51 | +######################### |
| 52 | +# Build the libcurl library |
| 53 | + |
| 54 | +include $(CLEAR_VARS) |
| 55 | +include $(LOCAL_PATH)/lib/Makefile.inc |
| 56 | +CURL_HEADERS := \ |
| 57 | + curlbuild.h \ |
| 58 | + curl.h \ |
| 59 | + curlrules.h \ |
| 60 | + curlver.h \ |
| 61 | + easy.h \ |
| 62 | + mprintf.h \ |
| 63 | + multi.h \ |
| 64 | + stdcheaders.h \ |
| 65 | + typecheck-gcc.h |
| 66 | + |
| 67 | +LOCAL_SRC_FILES := $(addprefix lib/,$(CSOURCES)) |
| 68 | +LOCAL_C_INCLUDES += $(LOCAL_PATH)/include/ |
| 69 | +LOCAL_CFLAGS += $(common_CFLAGS) |
| 70 | + |
| 71 | +LOCAL_COPY_HEADERS_TO := libcurl/curl |
| 72 | +LOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS)) |
| 73 | + |
| 74 | +LOCAL_MODULE:= libcurl |
| 75 | +LOCAL_MODULE_TAGS := optional |
| 76 | + |
| 77 | +# Copy the licence to a place where Android will find it. |
| 78 | +# Actually, this doesn't quite work because the build system searches |
| 79 | +# for NOTICE files before it gets to this point, so it will only be seen |
| 80 | +# on subsequent builds. |
| 81 | +ALL_PREBUILT += $(LOCAL_PATH)/NOTICE |
| 82 | +$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP) |
| 83 | + $(copy-file-to-target) |
| 84 | + |
| 85 | +include $(BUILD_STATIC_LIBRARY) |
| 86 | + |
| 87 | + |
| 88 | +######################### |
| 89 | +# Build the curl binary |
| 90 | + |
| 91 | +include $(CLEAR_VARS) |
| 92 | +include $(LOCAL_PATH)/src/Makefile.inc |
| 93 | +LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES)) |
| 94 | + |
| 95 | +LOCAL_MODULE := curl |
| 96 | +LOCAL_MODULE_TAGS := optional |
| 97 | +LOCAL_STATIC_LIBRARIES := libcurl |
| 98 | +LOCAL_SYSTEM_SHARED_LIBRARIES := libc |
| 99 | + |
| 100 | +LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib |
| 101 | + |
| 102 | +# This may also need to include $(CURLX_ONES) in order to correctly link |
| 103 | +# if libcurl is changed to be built as a dynamic library |
| 104 | +LOCAL_CFLAGS += $(common_CFLAGS) |
| 105 | + |
| 106 | +include $(BUILD_EXECUTABLE) |
| 107 | + |
0 commit comments