What version TFT_eSPI library should I use working with a Using an Elecrow 3.5 in. TFT9488 Display with a Wrover-B micro

[paulw517]

What version TFT_eSPI library should I use working with a Using an Elecrow 3.5 in. TFT9488 Display with a Wrover-B micro and SD Card Reader - Board Ver: 2.0 - SKU: DIS05035H?

I am attempting to compile and upload the example sketch provided with their Lesson # 3, the Sketch is SD_Card.ino

CrowPanel-ESP32-Display-Course-File/CrowPanel_ESP32_Tutorial/Code/V2.X/Lesson 3 Display Image from SD Card/2.4-2.8-3.5inch/SD_Card
/SD_Card.ino

[paulw517]

As defined in the User_Setup.h:

#define ILI9488_DRIVER

//#define TFT_WIDTH 320
//#define TFT_HEIGHT 480

//#define TFT_INVERSION_OFF
#define TFT_BL 27
#define TFT_BACKLIGHT_ON HIGH

#define TFT_MISO 12
#define TFT_MOSI 13
#define TFT_SCLK 14
#define TFT_CS 15
#define TFT_DC 2
#define TFT_RST -1
#define TOUCH_CS 33

#define SD_MOSI 23
#define SD_MISO 19
#define SD_SCK 18
#define SD_CS 5

#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT

#define SPI_FREQUENCY 27000000
#define SPI_TOUCH_FREQUENCY 2500000
#define SPI_READ_FREQUENCY 16000000
+++++++++++++++++++++++++++++

As displayed when compiling and uploading the sketch:

#warning >>>>------>> TOUCH_CS pin not defined, TFT_eSPI touch functions will not be available!

#define TFT_MISO 12
#define TFT_MISO -1

#define TFT_MOSI 13
#define TFT_MOSI 23

#define TFT_SCLK 14
#define TFT_SCLK 18

#define TFT_CS 15
#define TFT_CS -1

C:\Users\Paul\Documents\Arduino\libraries\TFT_eSPI-master/Processors/TFT_eSPI_ESP32.h:318: note: this is the location of the previous definition
#define TFT_SCLK 18

[paulw517]

I am new here, how do I use "markdowns"???