Installation

Installation

All sections are required, so please follow all steps carefully.

1. Klipper
2. Macros

Klipper

You must install klipper-toolchanger, Follow instruction on the linked page.

Macros

You need homing.cfg, macros.cfg, tool_detection.cfg and toolchanger.cfg from TapChanger Example

homing.cfg assumes you are using sensorless for X axis. It's impotrant to use this file when building your own homing as the order and macros it calls are required. If you use Hall Effects or end stops for both Axis, remove the _SENSORLESS_HOME_X call in [homing_override] with G28 X.

You can either add them manually to your klipper install, or alternatively, you can integrate them to your config so that moonraker keeps them up to date with your other software if they change. Below are the steps for the integrated way. If you make any changes to the files though, they will be overwritten if you update. If you choose to manually add them, make sure your printer.cfg reflects the location of them.

On the Klipper System

cd ~
git clone https://github.com/viesturz/tapchanger.git
ln -s ~/tapchanger/Klipper/config-example ~/printer_data/config/tapchanger

Add to moonraker.conf

[update_manager tapchanger]
type: git_repo
path: ~/tapchanger
origin: https://github.com/viesturz/tapchanger.git
primary_branch: main
managed_services: klipper