V2.22 | TS101 & S60 Added | PinecilV2 improved

[Ralim]

Headline features

Sequre S60

The Sequre S60 uses JBC tips, which makes it quite useful for the smaller tip types and extra options available.

TS101

The TS101 is the evolution of the TS100, picking up USB-PD.
It has otherwise similar tip support to the TS100/Pinecil/PinecilV2.

Absolutely massive kudos goes to @VioletEternity for her work on the reverse engineering of this. If you at all are helped by IronOS running on this device more credit goes to her than to I. Also big thanks to @whitequark for organising + supporting + magic.

PinecilV2

1. BLE is fixed on all devices
2. Bootup Logo support is finalised and working
3. Improved the tip control, improving accuracy and remove most oscillations

Profile heating mode for MHP30

This lets you define a heat profile and run this profile akin to a proper reflow device.
This can be used on the MHP30 by long-holding the A button (aka start button).
Profile can be edited in settings.

Note on newer OLED's

To prevent this release being held up forever, the TS101 and S60 are being released with a limitation on the OLED screen.
The current code will only draw to the upper left corner of the screen.
Assets have been made for rendering this at full size, but the code is not complete yet.

Smaller updates

• Filtering added to MHP tilt-exit to make it less sensitive
• Warning if a tip is detected to be shorted (TS101 + PinecilV2)
• Translation updates ❤️
• Documentation updates
• Lots of tooling and code cleanups

Full change list

• Update translation_CS.json by @cewbdex in Update translation_CS.json #1662
• Add validation ID to BLE by @ew1abz in Add validation ID to BLE #1666
• Update translation_FR.json by @HanaO00 in Update translation_FR.json #1667
• MHP30 Soldering/Reflow Temperature Profile by @codingcatgirl in MHP30 Soldering/Reflow Temperature Profile #1672
• Update translation_DE.json by @discip in Update translation_DE.json #1675
• corrected character count by @discip in corrected character count #1677
• removing extra entries by @discip in removing extra entries #1676
• corrected wording by @discip in corrected wording #1679
• Update translation_FR.json by @HanaO00 in Update translation_FR.json #1681
• Adjust how heap and ram sections are allocated by @Ralim in Adjust how heap and ram sections are allocated #1682
• Update translation_IT.json by @federicodilo in Update translation_IT.json #1685
• Translation_IT.json rev.2 by @federicodilo in Translation_IT.json rev.2 #1687
• Merging newest translations into dev by @MAuCTEP in Merging newest translations into dev #1689
• Patch 4 by @onxblog in Patch 4 #1691
• S60 Support by @Ralim in S60 Support #1692
• Unify sha-bangs for python scripts by @ia in Unify sha-bangs for python scripts #1703
• Update comments by @ia in Update comments #1702
• source/Makefile: add HOST_PYTHON, extend clean target, remove -.d generation by @ia in source/Makefile: add HOST_PYTHON, extend clean target, remove -.d generation #1701
• AutoStartMode refactoring by @ia in AutoStartMode refactoring #1712
• source/Makefile: update for -C support by @ia in source/Makefile: update for -C support #1710
• Save settings on change only / All builds OK (Best practices to fit changes onto flash? (WAS: rationale for writing settings onto flash on change only) #1699) by @ia in Save settings on change only / All builds OK (#1699) #1704
• Show power source type on detailed screen in soldering mode (Show power source type on detailed screen in soldering mode #1708) by @ia in Show power source type on detailed screen in soldering mode (#1708) #1709
• Ts101 by @Ralim in Ts101 #1695
• Larger OLED Support by @Ralim in Larger OLED Support #1713
• Spanish translation is 100% complete by @eyebrowdogs in Spanish translation is 100% complete #1715
• Update translation_PT.json by @TheScientistPT in Update translation_PT.json #1716
• Zipping compiler warning about POW_PD_EXT / Two options by @ia in Zipping compiler warning about POW_PD_EXT / Two options #1711
• A bit of clean-up & update configuration.h files by @ia in A bit of clean-up & update configuration.h files #1717
• Adjust divider by @Ralim in Adjust divider #1723
• correct wording for 'max power' by @discip in correct wording for 'max power' #1727
• Remove 0.5 ohm increase to resistance by @dallinson in Remove 0.5 ohm increase to resistance #1728
• Root directory content refactoring by @ia in Root directory content refactoring #1725
• .gitignore: refactor, unify & update by @ia in .gitignore: refactor, unify & update #1731
• Cosmetic code style refactoring: add enum for screen orientation & define for OLED state by @ia in Cosmetic code style refactoring: add enum for screen orientation & define for OLED state #1732
• Try side-port of different linker and ram for PinecilV2 by @Ralim in Try side-port of different linker and ram for PinecilV2 #1730
• Refactoring check for docker to fix a bug to use Makefile inside docker by @ia in Refactoring check for docker to fix a bug to use Makefile inside docker #1735
• Update README for new models by @Ralim in Update README for new models #1705
• Fix echo in top-level Makefile for some environments by @ia in Fix echo in top-level Makefile for some environments #1737
• Suggestion to update BUILD_VERSION policy by @ia in Suggestion to update BUILD_VERSION policy #1733
• Implement autogeneration of Documentation/README.md by @ia in Implement autogeneration of Documentation/README.md #1738
• Translations/: add missing exec bit for python scripts by @ia in Translations/: add missing exec bit for python scripts #1742
• clang-format implementation by @ia in clang-format implementation #1740
• Documentation/index.md: add Feedback section (New IronOS docs pages, add tab/method to jump to Discussions and Issue tickets. #1552) as suggested by @ia in Documentation/index.md: add Feedback section (Ralim#1552) as suggested #1744
• Implement printSymbolDeg() helper function as method for OLED class by @ia in Implement printSymbolDeg() helper function as method for OLED class #1743
• Update translation_IT.json by @federicodilo in Update translation_IT.json #1747
• Move check-style core logic from makefile to shell script by @ia in Move check-style core logic from makefile to shell script #1745
• Replace /build/source by /build/ironos to eliminate ambiguity with /build/source/source by @ia in Replace /build/source by /build/ironos to eliminate ambiguity with /build/source/source #1748
• Move related pieces of documentation from wiki to Documentation/ by @ia in Move related pieces of documentation from wiki to Documentation/ #1746
• Fix github CI clang-format related check_c-cpp job by @ia in Fix github CI clang-format related check_c-cpp job #1752
• Implement target in Makefile to run github CI-like checks locally by @ia in Implement target in Makefile to run github CI-like checks locally #1753
• BLE crash fixing (Part ?) by @Ralim in BLE crash fixing (Part ?) #1756
• a bit more 'transparent' V calibration by @discip in a bit more 'transparent' V calibration #1758
• Add Core/Drivers to the scope of style check by clang-format by @ia in Add Core/Drivers to the scope of style check by clang-format #1754
• Simplify commands for jobs in push.yml by @ia in Simplify commands for jobs in push.yml #1761
• push.yml: probable fix Multi-lang builds of Pinecilv2 fail with ld/lto1 errors #1764 by @ia in push.yml: probable fix #1764 #1765
• Decomission of scripts/ci by @ia in Decomission of scripts/ci #1760
• Update translation_UK.json by @eslng in Update translation_UK.json #1767
• BLE getting started document by @Ralim in BLE getting started document #1763
• Remove exec bit from a translation json file by @ia in Remove exec bit from a translation json file #1770
• Pinecil v2 short detection at boot by @alextrical in Pinecil v2 short detection at boot #1729
• Implement ci target for Makefile to reproduce github CI actions & artifacts by @ia in Implement ci target for Makefile to reproduce github CI actions & artifacts #1769
• Use 3 count filter for MHP30 acceleromter by @Ralim in Use 3 count filter for MHP30 acceleromter #1762
• Implement proper git SHA ID marking for builds during pull-requests by @ia in Implement proper git SHA ID marking for builds during pull-requests #1772
• Swedish translation update to include new strings by @TheMoo96 in Swedish translation update to include new strings #1779
• metadata.py: update tagging considering github CI builds by @ia in metadata.py: update tagging considering github CI builds #1782
• Update tagging for detached commit case & update docs by @ia in Update tagging for detached commit case & update docs #1783
• Update translation_IT.json by @federicodilo in Update translation_IT.json #1784
• Update logo flashing information by @Ralim in Update logo flashing information #1787
• Update build.sh to pass shellcheck checks by @ia in Update build.sh to pass shellcheck checks #1789
• Make make docker-clean to remove docker build cache by @ia in Make make docker-clean to remove docker build cache #1790
• Update translation_CS.json by @davidrothb in Update translation_CS.json #1791
• Update & translate for Bulgarian language by @ia in Update & translate for Bulgarian language #1792
• Update & translate for Russian language by @ia in Update & translate for Russian language #1793
• Revert "Remove 0.5 ohm increase to resistance" by @Ralim in Revert "Remove 0.5 ohm increase to resistance" #1794
• Update Slovak translation by @gamelaster in Update Slovak translation #1795
• Include Bluetooth document to read-the-docs site generating by @ia in Include Bluetooth document to read-the-docs site generating #1798
• Add detailed OLED replacement info to Troubleshooting document by @ia in Add detailed OLED replacement info to Troubleshooting document #1797
• Add python packages required by mkdocs into docker container by @ia in Add python packages required by mkdocs into docker container #1796
• Include History.md to online docs as Changelog by @ia in Include History.md to online docs as Changelog #1799
• docs/History.md: add info for 2.20 & 2.21 by @ia in docs/History.md: add info for 2.20 & 2.21 #1804
• chore(deps): bump actions/checkout from 3 to 4 by @dependabot in chore(deps): bump actions/checkout from 3 to 4 #1811
• Update translation_DE.json by @discip in Update translation_DE.json #1786
• Temperature code updates by @Ralim in Temperature code updates #1814
• Add missing Chinese translation by @dogtopus in Add missing Chinese translation #1818
• Update Slovak translation by @OndroNR in Update Slovak translation #1822
• Pinecil v2 tune via PID by @Ralim in Pinecil v2 tune via PID #1827

New Contributors

• @codingcatgirl made their first contribution in MHP30 Soldering/Reflow Temperature Profile #1672
• @MAuCTEP made their first contribution in Merging newest translations into dev #1689
• @eyebrowdogs made their first contribution in Spanish translation is 100% complete #1715
• @TheScientistPT made their first contribution in Update translation_PT.json #1716
• @dallinson made their first contribution in Remove 0.5 ohm increase to resistance #1728
• @alextrical made their first contribution in Pinecil v2 short detection at boot #1729
• @TheMoo96 made their first contribution in Swedish translation update to include new strings #1779
• @davidrothb made their first contribution in Update translation_CS.json #1791

Full Changelog: v2.21...v2.22

---

This discussion was created from the release V2.22 | TS101 & S60 Added | PinecilV2 improved.

[munecito]

@Ralim

Any chance that I can invite dinner when I get to Sydney in a couple of weeks to say thank you for getting IronOS to the TS101?

I would take @whitequark and @VioletEternity but I am afraid they are not in Oz.

[Phixion35]

Thank you to all for updating and improving IronOS.

Is there any reason I would need to update my Pinecil v2 from v2.21 to this new 2.22 version update? Thank you again to all!!

[gamelaster]

Yes, as on V2.21, there was issue with Bluetooth, so Pinecil did not worked on first try. I recommend to upgrade it. Also, voltage stability is very improved.

[jockethebastard]

With PD 3.0, I’m not able to get more than 45W with 20V. Is that how it’s supposed to be, cause I thought it would support 65W?
Anyways, thanks for doing this, the firmware is super, and very nice to have voltage and wattage on the display.

[Ralim]

What device are you referring to? How are you measuring the wattage?
On display wattage is quite approximated + will miss the peak power pulled during shorter re-heat cycles.

[jockethebastard]

Sorry I totally forgot to mention what device I was using. It’s a brand new TS-101. I’m only looking at the display, so I guess it’s normal then. /Joakim Norgren8 jan. 2024 kl. 10:46 skrev Ben V. Brown ***@***.***>: What device are you referring to? How are you measuring the wattage? On display wattage is quite approximated + will miss the peak power pulled during shorter re-heat cycles. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>

[Redwish89]

Any place to see the progress on a new release? Going to get my TS101 next week but if the fullscreen OLED rendering is coming up i'm think i will hold off a bit on installing IronOS

[discip]

You could test the device and as far as I know it does work properly, but as you mentioned the OLED is not yet working as intended.
I recommend waiting for the official release which will support big OLEDs.

[Redwish89]

I think i will wait, but if there is a place to keep track on releases it would be nice :)

[discip]

You could somewhat track that by watching the evolution of these PRs for example:

#1749
#1819

Or see here whenever a new CI run for the dev branch was performed.
https://github.com/Ralim/IronOS/actions

[Jonny-T-cyber]

I follow the discussion

[BillyBonito]

Будет ли прошивка и русский язык на fnirsi HS-01 ?

[ruslan61rus]

Is firmware V2.22 for Secure S60, suitable with S60P(new revision)?

[discip]

No, but the S60P version is already being worked on.

[ruslan61rus]

Ok, thank you!

[DarthZurath]

TS80P after flashing this firmware shows idle temp at around 170C, which is bizzare because tip is room temp. Needless to say I don't live in hell. Iron also tries QC instead of PD on PD only power supplies and thus stays limited to 5V...
I have no issues with stock firmware, this unfortunately doesn't work as expected for me.

[Ralim]

Your likely have one of the newer units with the cloned lower cost STM32 alternative that causes issues with the ADC readings. While these issues should be fixed in 2.23, you are of course welcome to use the vendor firmware :)

[DarthZurath]

Thank you for your reply. You're right, 2.23 fixed those issues. Temp readings are still a bit jumpy, but look realistic.

There's also a UI bug I noticed. No matter what I set for boot logo setting has no effect. Every time iron is turned on logo flashes for about half a second and goes to idle screen. Is it a known bug? I couldn't find anything about that in issues. Present in both builds.

[Ralim]

Is this a logo you flashed or the one miniware burn into their bootloader? The runtime software can only control our boot logo. It can't adjust the one they put in their bootloader :(

[DarthZurath]

It's Miniware logo for sure. That's what I'm talking about: #1308
Do you know if it's possible to find a stock Miniware logo to flash it, so it would look just as stock firmware when it boots.
I can't seem to find stock logo available for download anywhere sadly.