Riemers3DXNA2flightsim04creatingcity
To be honest, there is not much new XNA stuff you値l learn in this chapter: the code of last chapter will simply be expanded. You値l be drawing buildings on your floorplan, and then again roofs on your buildings. For this reason, I値l summarize the adjustments and additions.
Because our program will support multiple buildings (5 in the case of our specify texture map), we値l need an array that contains the heights of these different buildings. So define this array at the top of your code:
int[] buildingHeights = new int[] { 0, 2, 2, 6, 5, 4 };Next, we値l process our floorPlan array, so its numbers reflect the type of building. A 0 will remain a 0, but a 1 will be replaced by a random number between 1 and 5, indicating the type of building. To do this, add this code to the bottom of our LoadFloorPlan method:
Random random = new Random();
int differentBuildings = buildingHeights.Length - 1;
for (int x = 0; x < floorPlan.GetLength(0); x++)
for (int y = 0; y < floorPlan.GetLength(1); y++)
if (floorPlan[x, y] == 1)
floorPlan[x, y] = random.Next(differentBuildings) + 1;We first initialize a random number generator, from which we receive random numbers by calling the Next method. This Next method will return a random positive number, lower than the argument passed.
We scroll through our floorPlan array, and every time a 1 is found in the array, it is replaced by a positive integer between 1 and 5.
Next, we will start expanding the SetUpVertices method so it also provides the vertices for the walls and roofings.
Add these variables to the beginning of the method:
int differentBuildings = buildingHeights.Length - 1;
float imagesInTexture = 1 + differentBuildings * 2;We start by adjusting the code we have so it also renders roofings. Replace the code inside the for-loop by this:
int currentbuilding = floorPlan[x, z];
//floor or ceiling
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2(currentbuilding * 2 / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));This is the exact some code as in last chapter, with some interesting changes. Firstly, this code renders 2 triangles, no matter what the number stored in the floorPlan is. Next, the height (Y coordinate) is taken from the buildingHeights array we initialized at the beginning of this chapter. Then you see that the X-coordinate from the texture is dynamically calculated. Since we have 5 different buildings, the X-coord of the left side of the floor tile is 0, of the left side of the first roof is 2/11, of the second roof 4/11, .., of the last roof 10/11. In a formula: currentbuilding * 2 / imagesInTexture . The X-coord of the right side of the floor is 1/11, of the first roof 3/11, ?, of the last roof 11/11. In a formula: (currentbuilding * 2 + 1) / imagesInTexture .
In a nutshell: if a 0 is encountered, the floor image is drawn, if a building number is encountered, the corresponding roofing image is drawn at the corresponding height, found in the buildingHeights array. You can try running this code, and each time you run the program you値l see another image roof at a different height, because the type of buildings are chosen at random.
The good news: we致e already covered all the new stuff of this chapter. The bad news: drawing the walls of the buildings implies copying most of this code, only with different coordinates, normals and texture coordinates. To be complete, I値l list the whole method here and quickly discuss it:
private void SetUpVertices()
{
int differentBuildings = buildingHeights.Length - 1;
float imagesInTexture = 1 + differentBuildings * 2;
int cityWidth = floorPlan.GetLength(0);
int cityLength = floorPlan.GetLength(1);
List<VertexPositionNormalTexture> verticesList = new List<VertexPositionNormalTexture> ();
for (int x = 0; x < cityWidth; x++)
{
for (int z = 0; z < cityLength; z++)
{
int currentbuilding = floorPlan[x, z];
//floor or ceiling
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2(currentbuilding * 2 / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));
if (currentbuilding != 0)
{
//front wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
//back wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
//left wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
//right wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
}
}
}
cityVertexBuffer = new VertexBuffer(device, verticesList.Count * VertexPositionNormalTexture.SizeInBytes, BufferUsage.WriteOnly); cityVertexBuffer.SetData<VertexPositionNormalTexture> (verticesList.ToArray());
texturedVertexDeclaration = new VertexDeclaration(device, VertexPositionNormalTexture.VertexElements);
}Whow THAT IS what I call a method! Quite impressive, but it contains nothing new to you. First the floors or roofs are drawn. Then we add 6 vertices for each of the 4 walls. Note that each vertex has to store a correct 3D coordinate for the position, a correct texture coordinate so the correct part of the texture map is put over a wall, and a correct normal vector so we can add lighting in a next chapter.
You can also notice the Add method of the List comes in very handy.
Run this code a few to verify that each time you get a different type of building. To make this a bit more impressive, let us change the dimensions and contents of our floorPlan array:
floorPlan = new int[,]
{
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,1,1,0,0,0,1,1,0,0,1,0,1},
{1,0,0,1,1,0,0,0,1,0,0,0,1,0,1},
{1,0,0,0,1,1,0,1,1,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,1,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,1,1,0,0,0,1,0,0,0,0,0,0,1},
{1,0,1,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,1,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,1,0,0,0,1,0,0,0,0,1},
{1,0,1,0,0,0,0,0,0,1,0,0,0,0,1},
{1,0,1,1,0,0,0,0,1,1,0,0,0,1,1},
{1,0,0,0,0,0,0,0,1,1,0,0,0,1,1},
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1},
};This should already be runnable, as the code in our DrawCity method adjusts itself based on the content of our VertexBuffer. But let痴 first reposition our camera or we will see only a very small portion of our city:
viewMatrix = Matrix.CreateLookAt(new Vector3(20, 13, -5), new Vector3(8, 0, -7), new Vector3(0, 1, 0));Now run this code! This is what you should see:
using System;
using System.Collections.Generic;
using System.Linq;
using Microsoft.Xna.Framework;
using Microsoft.Xna.Framework.Audio;
using Microsoft.Xna.Framework.Content;
using Microsoft.Xna.Framework.GamerServices;
using Microsoft.Xna.Framework.Graphics;
using Microsoft.Xna.Framework.Input;
using Microsoft.Xna.Framework.Media;
namespace Series3D2
{
public class Game1 : Microsoft.Xna.Framework.Game
{
GraphicsDeviceManager graphics;
SpriteBatch spriteBatch;
GraphicsDevice device;
Effect effect;
Texture2D sceneryTexture;
VertexBuffer cityVertexBuffer;
int[,] floorPlan;
int[] buildingHeights = new int[] { 0, 2, 2, 6, 5, 4 };
Matrix viewMatrix;
Matrix projectionMatrix;
public Game1()
{
graphics = new GraphicsDeviceManager(this);
Content.RootDirectory = "Content";
}
protected override void Initialize()
{
graphics.PreferredBackBufferWidth = 500;
graphics.PreferredBackBufferHeight = 500;
graphics.IsFullScreen = false;
graphics.ApplyChanges();
Window.Title = "Riemer's XNA Tutorials -- 3D Series 2";
base.Initialize();
}
protected override void LoadContent()
{
spriteBatch = new SpriteBatch(GraphicsDevice);
device = graphics.GraphicsDevice;
effect = Content.Load<Effect> ("effects");
sceneryTexture = Content.Load<Texture2D> ("texturemap");
SetUpCamera();
LoadFloorPlan();
SetUpVertices();
}
private void SetUpCamera()
{
viewMatrix = Matrix.CreateLookAt(new Vector3(20, 13, -5), new Vector3(8, 0, -7), new Vector3(0, 1, 0));
projectionMatrix = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, device.Viewport.AspectRatio, 0.2f, 500.0f);
}
private void LoadFloorPlan()
{
floorPlan = new int[,]
{
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,1,1,0,0,0,1,1,0,0,1,0,1},
{1,0,0,1,1,0,0,0,1,0,0,0,1,0,1},
{1,0,0,0,1,1,0,1,1,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,1,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,1,1,0,0,0,1,0,0,0,0,0,0,1},
{1,0,1,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,0,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,1,0,0,0,0,0,0,0,0,1},
{1,0,0,0,0,1,0,0,0,1,0,0,0,0,1},
{1,0,1,0,0,0,0,0,0,1,0,0,0,0,1},
{1,0,1,1,0,0,0,0,1,1,0,0,0,1,1},
{1,0,0,0,0,0,0,0,1,1,0,0,0,1,1},
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1},
};
Random random = new Random();
int differentBuildings = buildingHeights.Length - 1;
for (int x = 0; x < floorPlan.GetLength(0); x++)
for (int y = 0; y < floorPlan.GetLength(1); y++)
if (floorPlan[x, y] == 1)
floorPlan[x, y] = random.Next(differentBuildings) + 1;
}
private void SetUpVertices()
{
int differentBuildings = buildingHeights.Length - 1;
float imagesInTexture = 1 + differentBuildings * 2;
int cityWidth = floorPlan.GetLength(0);
int cityLength = floorPlan.GetLength(1);
List<VertexPositionNormalTexture> verticesList = new List<VertexPositionNormalTexture> ();
for (int x = 0; x < cityWidth; x++)
{
for (int z = 0; z < cityLength; z++)
{
int currentbuilding = floorPlan[x, z];
//floor or ceiling
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2(currentbuilding * 2 / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 1, 0), new Vector2((currentbuilding * 2 + 1) / imagesInTexture, 1)));
if (currentbuilding != 0)
{
//front wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(0, 0, -1), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
//back wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(0, 0, 1), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
//left wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z - 1), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, buildingHeights[currentbuilding], -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x, 0, -z), new Vector3(-1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
//right wall
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z - 1), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2 - 1) / imagesInTexture, 0)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, 0, -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 1)));
verticesList.Add(new VertexPositionNormalTexture(new Vector3(x + 1, buildingHeights[currentbuilding], -z), new Vector3(1, 0, 0), new Vector2((currentbuilding * 2) / imagesInTexture, 0)));
}
}
}
cityVertexBuffer = new VertexBuffer(device, VertexPositionNormalTexture.VertexDeclaration, verticesList.Count, BufferUsage.WriteOnly);
cityVertexBuffer.SetData<VertexPositionNormalTexture> (verticesList.ToArray()); }
protected override void UnloadContent()
{
}
protected override void Update(GameTime gameTime)
{
if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed)
this.Exit();
base.Update(gameTime);
}
protected override void Draw(GameTime gameTime)
{
device.Clear(ClearOptions.Target | ClearOptions.DepthBuffer, Color.DarkSlateBlue, 1.0f, 0);
DrawCity();
base.Draw(gameTime);
}
private void DrawCity()
{
effect.CurrentTechnique = effect.Techniques["Textured"];
effect.Parameters["xWorld"].SetValue(Matrix.Identity);
effect.Parameters["xView"].SetValue(viewMatrix);
effect.Parameters["xProjection"].SetValue(projectionMatrix);
effect.Parameters["xTexture"].SetValue(sceneryTexture);
foreach (EffectPass pass in effect.CurrentTechnique.Passes)
{
pass.Apply();
device.SetVertexBuffer(cityVertexBuffer);
device.DrawPrimitives(PrimitiveType.TriangleList, 0, cityVertexBuffer.VertexCount/3);
}
}
}
}