PriceHelperV2.sol

// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

  /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

    function addressToString(address _address) internal pure returns(string memory) {
        bytes32 _bytes = bytes32(uint256(_address));
        bytes memory HEX = "0123456789abcdef";
        bytes memory _addr = new bytes(42);

        _addr[0] = '0';
        _addr[1] = 'x';

        for(uint256 i = 0; i < 20; i++) {
            _addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
            _addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
        }

        return string(_addr);

    }
}

interface IOwnable {
  function manager() external view returns (address);

  function renounceManagement() external;
  
  function pushManagement( address newOwner_ ) external;
  
  function pullManagement() external;
}

contract Ownable is IOwnable {

    address internal _owner;
    address internal _newOwner;

    event OwnershipPushed(address indexed previousOwner, address indexed newOwner);
    event OwnershipPulled(address indexed previousOwner, address indexed newOwner);

    constructor () {
        _owner = msg.sender;
        emit OwnershipPushed( address(0), _owner );
    }

    function manager() public view override returns (address) {
        return _owner;
    }

    modifier onlyManager() {
        require( _owner == msg.sender, "Ownable: caller is not the owner" );
        _;
    }

    function renounceManagement() public virtual override onlyManager() {
        emit OwnershipPushed( _owner, address(0) );
        _owner = address(0);
    }

    function pushManagement( address newOwner_ ) public virtual override onlyManager() {
        require( newOwner_ != address(0), "Ownable: new owner is the zero address");
        emit OwnershipPushed( _owner, newOwner_ );
        _newOwner = newOwner_;
    }
    
    function pullManagement() public virtual override {
        require( msg.sender == _newOwner, "Ownable: must be new owner to pull");
        emit OwnershipPulled( _owner, _newOwner );
        _owner = _newOwner;
    }
}

interface IBond{
    function initializeBondTerms( 
        uint _controlVariable, 
        uint _vestingTerm,
        uint _minimumPrice,
        uint _maxPayout,
        uint _fee,
        uint _maxDebt,
        uint _initialDebt
    ) external;
    function totalDebt() external view returns(uint);
    function isLiquidityBond() external view returns(bool);
    function bondPrice() external view returns ( uint );
    function terms() external view returns(
        uint controlVariable, // scaling variable for price
        uint vestingTerm, // in blocks
        uint minimumPrice, // vs principle value
        uint maxPayout, // in thousandths of a %. i.e. 500 = 0.5%
        uint fee, // as % of bond payout, in hundreths. ( 500 = 5% = 0.05 for every 1 paid)
        uint maxDebt // 9 decimal debt ratio, max % total supply created as debt
);
}

contract BondPriceHelperV2 is Ownable {

    using SafeMath for uint256;

    address public realOwner;
    mapping( address => bool ) public executors;
    mapping( address => bool ) public bonds;

    constructor ( 
        address _realOwner
    ) {
        require( _realOwner != address(0) );
        realOwner = _realOwner;
    }
    
    function addExecutor(address executor) external onlyManager{
        executors[executor]=true;
    }
    
    function removeExecutor(address executor) external onlyManager{
        delete executors[executor];
    }

    function addBond(address bond) external onlyManager{
        //IBond(bond).bondPrice();
        IBond(bond).terms();
        IBond(bond).isLiquidityBond();
        bonds[bond]=true;
    }
    
    function removeBond(address bond) external onlyManager{
        delete bonds[bond];
    }
    
    function recal(address bond,uint percent) view internal returns(uint){
        if(IBond(bond).isLiquidityBond()) return percent;
        else{
            uint price=IBond(bond).bondPrice();
            return price.mul(percent).sub(1000000).div(price.sub(100));
        }
    }
    
    function viewPriceAdjust(address bond,uint percent) view external returns(uint _controlVar,uint _oldControlVar,uint _minPrice,uint _oldMinPrice,uint _price){
        uint price=IBond(bond).bondPrice();
        (uint controlVariable, , uint minimumPrice,, , )=
        IBond(bond).terms();
        if(minimumPrice==0){
            return (
                controlVariable.mul(recal(bond,percent)).div(10000),
                controlVariable,
                minimumPrice,
                minimumPrice,
                price
            );
        }else
            return (
                controlVariable,
                controlVariable,
                minimumPrice.mul(percent).div(10000),
                minimumPrice,
                price
            );
    }

    function adjustPrice(address bond,uint percent) external{
        if(percent==0)return;
        require(percent>8000&&percent<12000,"price adjustment can't be more than 20%");
        require(executors[msg.sender]==true,'access deny for price adjustment');
        (uint controlVariable, uint vestingTerm, uint minimumPrice,uint maxPayout, uint fee, uint maxDebt)=
        IBond(bond).terms();
        if(minimumPrice==0){
            IBond(bond).initializeBondTerms(
                controlVariable.mul(recal(bond,percent)).div(10000),
                vestingTerm,
                minimumPrice,
                maxPayout,
                fee,
                maxDebt,
                IBond(bond).totalDebt()
            );
        }else
            IBond(bond).initializeBondTerms(
                controlVariable,
                vestingTerm,
                minimumPrice.mul(percent).div(10000),
                maxPayout,
                fee,
                maxDebt,
                IBond(bond).totalDebt()
            );
    }

    function returnOwnership(address bond) external onlyManager(){
        IOwnable(bond).pushManagement(realOwner);
    }
    
    function receiveOwnership(address bond) external onlyManager(){
        IOwnable(bond).pullManagement();
    }
}