diff --git a/Firmware/skr_mini_e3_v2_config.cfg b/Firmware/skr_mini_e3_v2_config.cfg
index 049047c..4281497 100644
--- a/Firmware/skr_mini_e3_v2_config.cfg
+++ b/Firmware/skr_mini_e3_v2_config.cfg
@@ -344,8 +344,16 @@ gcode:
 [gcode_macro PRINT_START]
 #   Use PRINT_START for the slicer starting script - PLEASE CUSTOMISE THE SCRIPT
 gcode:
+    {% set BED_TEMP = params.BED_TEMP|default(110)|float %}
+    {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(245)|float %}
+    {% set th = printer.toolhead %}
+    M140 S{BED_TEMP} ; set bed temp
+    M104 S{EXTRUDER_TEMP} ; set hotend temp
     M117 Homing...                 ; display message
-    G28 Y0 X0 Z0
+    G28
+    M190 S{BED_TEMP} ; wait for bed temp
+    M109 S{EXTRUDER_TEMP} ; wait for hotend temp
+    G1 Z15.0 F600
     
     ##Purge Line Gcode
     #G92 E0;
diff --git a/Firmware/skr_mini_e3_v3_config.cfg b/Firmware/skr_mini_e3_v3_config.cfg
index 0f75139..f716fef 100644
--- a/Firmware/skr_mini_e3_v3_config.cfg
+++ b/Firmware/skr_mini_e3_v3_config.cfg
@@ -343,8 +343,16 @@ gcode:
 [gcode_macro PRINT_START]
 #   Use PRINT_START for the slicer starting script - PLEASE CUSTOMISE THE SCRIPT
 gcode:
+    {% set BED_TEMP = params.BED_TEMP|default(110)|float %}
+    {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(245)|float %}
+    {% set th = printer.toolhead %}
+    M140 S{BED_TEMP} ; set bed temp
+    M104 S{EXTRUDER_TEMP} ; set hotend temp
     M117 Homing...                 ; display message
-    G28 Y0 X0 Z0
+    G28
+    M190 S{BED_TEMP} ; wait for bed temp
+    M109 S{EXTRUDER_TEMP} ; wait for hotend temp
+    G1 Z15.0 F600
     
     ##Purge Line Gcode
     #G92 E0;