Mavic Air Support? #36
Comments
|
No, the current version does not. You can give this fork a shot if you'd like (no guarantee it works, I haven't used it): https://github.com/The1only/rosettadrone . |
|
I will see what i can accomplish. i am only a level 1 programmer but who knows! is there documentation on how other made support for other drones? thank you so much for the quick reply and something cool to use for my own projects! |
|
I have not tried the Air on the new built. I will do that later this spring. If you do, let me know how it vent. Use master on The1only site, it might work as it uses all the latest modules. Right now I am addind the DJI simulator to enable easier testing. Yesterday I uppdated the Mavlink version to the latest. Best regards The1only |
|
I was able to build successfully but I think due to me previously working
on unity android projects I have to re install android studio and my sdk.
Will let you know how it goes later today. Thank you for the response and
opportunity to work with you.
…On Sat, Feb 22, 2020, 8:48 AM Terje ***@***.***> wrote:
I have not tried the Air on the new built. I will do that later this
spring. If you do, let me know how it vent. Use master on The1only site, it
might work as it uses all the latest modules. Right now I am addind the DJI
simulator to enable easier testing. Yesterday I uppdated the Mavlink
version to the latest. Best regards The1only
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#36?email_source=notifications&email_token=AHJKTGK3DIZKA4GH6JRDLQTREEUKRA5CNFSM4KYUF2VKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMVAWDY#issuecomment-589957903>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AHJKTGL2M3WEI4XDJDRLEJ3REEUKRANCNFSM4KYUF2VA>
.
|
|
Would you have any reason why my app keeps saying Register SDK fails, check
network is connected? I made the keys.xml file in the values folder then
the build says it runs successfully but the app never connects.
*Adam Dabdoub*
Autonomy Systems Technician
Sensors & Software Systems Division
300 College Park, Dayton, OH 45469-0089
c: 513.886.0301| udri.udayton.edu <https://www.udayton.edu/udri/>
*University of Dayton Research Institute*
On Sat, Feb 22, 2020 at 9:52 AM Adam Dabdoub <[email protected]>
wrote:
… I was able to build successfully but I think due to me previously working
on unity android projects I have to re install android studio and my sdk.
Will let you know how it goes later today. Thank you for the response and
opportunity to work with you.
On Sat, Feb 22, 2020, 8:48 AM Terje ***@***.***> wrote:
> I have not tried the Air on the new built. I will do that later this
> spring. If you do, let me know how it vent. Use master on The1only site, it
> might work as it uses all the latest modules. Right now I am addind the DJI
> simulator to enable easier testing. Yesterday I uppdated the Mavlink
> version to the latest. Best regards The1only
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#36?email_source=notifications&email_token=AHJKTGK3DIZKA4GH6JRDLQTREEUKRA5CNFSM4KYUF2VKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMVAWDY#issuecomment-589957903>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AHJKTGL2M3WEI4XDJDRLEJ3REEUKRANCNFSM4KYUF2VA>
> .
>
|
|
Missions work and waypoints work. Looking for another person with a mavic
air to test if swarming works with them. Thank you for contributers.
…On Sat, Feb 22, 2020, 9:52 AM Adam Dabdoub ***@***.***> wrote:
I was able to build successfully but I think due to me previously working
on unity android projects I have to re install android studio and my sdk.
Will let you know how it goes later today. Thank you for the response and
opportunity to work with you.
On Sat, Feb 22, 2020, 8:48 AM Terje ***@***.***> wrote:
> I have not tried the Air on the new built. I will do that later this
> spring. If you do, let me know how it vent. Use master on The1only site, it
> might work as it uses all the latest modules. Right now I am addind the DJI
> simulator to enable easier testing. Yesterday I uppdated the Mavlink
> version to the latest. Best regards The1only
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#36?email_source=notifications&email_token=AHJKTGK3DIZKA4GH6JRDLQTREEUKRA5CNFSM4KYUF2VKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMVAWDY#issuecomment-589957903>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AHJKTGL2M3WEI4XDJDRLEJ3REEUKRANCNFSM4KYUF2VA>
> .
>
|
|
You got the air connected? Or swapped to mavic?9 If you also uses Go4 or similar you must forse it to stop befor connecting. You should get a question asking what app to connect the drone to. |
|
I got my air connected after reinstalling android and the android SDK. Had
to switch to android 8.1.1
…On Sat, Feb 22, 2020, 11:27 AM Terje ***@***.***> wrote:
You got the air connected? Or swapped to mavic?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#36?email_source=notifications&email_token=AHJKTGM6YMOUWYJUULCJC7TREFG6JA5CNFSM4KYUF2VKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMVEHCI#issuecomment-589972361>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AHJKTGIW576YRE75FXME36DREFG6JANCNFSM4KYUF2VA>
.
|
|
And live video??? Is that working? |
|
Havent had a chance to get to this project in awhile. gonna revamp it so i can get swarming |
Is this working with the mavic air? i will be testing it tonight but are there any problems known to you at the moment?
The text was updated successfully, but these errors were encountered: