[Target Request] TMOTORF411 (BMI270)

[liu-root]

T-Motor F411 Lite

• Please provide the target name. e.g. TMOTORF411
• Please provide vendor and model of the FC. e.g. T-Motor Velox F411 Lite 30x30 Flight Controller
• Please provide a link to the vendor specifications.
  e.g https://store.tmotor.com/goods.php?id=1229

CLI dump or Unified Target

• Please provide a CLI dump of DEFAULTS or link to unified target. : https://github.com/betaflight/unified-targets/blob/master/configs/default/TMTR-TMOTORF411.config

Hello team, I would like to request the support package for the above FC. Also, I can collaborate with any testing needed.
Please note that the default config for betaflight has the gyro alignment incorrect. Please note the issue I opened to have them fixed it: betaflight/unified-targets#641

[BeauBrewski]

There's going to be some delay in getting this one to you, as it has the new-ish BMI270 gyro on it and we're still working on getting that compatible with Emuflight.

[BeauBrewski]

Working on test target
#890

[BeauBrewski]

@nerdCopter just got another request for this.

[nerdCopter]

• created by script only, did not investigate resultant files

• EmuFlight_0.4.2_TMTR_TMOTORF411_Build_9b20fc84e_Analog.hex.zip

  • [Yes/No/Untested] hex Flash & subsequent USB connect
  • [Yes/No/Untested] Gyro
  • [Yes/No/Untested] Accelerometer
  • [Yes/No/Untested] Is the Serial Count correct? (Ports tab UARTs)
  • [Yes/No/Untested] Motors
  • [Yes/No/Untested] Onboard ADC
  • [Yes/No/Untested] OSD (analog)
  • [Yes/No/Untested] Smart Audio controls
  • [Yes/No/Untested] Beeper/Alarm switch
  • [Yes/No/Untested] Barometer
  • [Yes/No/Untested] Blackbox flash-chip/sdcard
  • [Yes/No/Untested] LED Strip
  • [Yes/No/Untested] GPS
  • [Yes/No/Untested] BlueTooth (if applicable)

[BeauBrewski]

Thanks, @nerdCopter . Will keep you updated on results

[nerdCopter]

resolved by #1036
also refer to #487