Nano 33 BLE Sense rev2 Reset Button

[Mute916]

Hi All,

I have a Nano 33 BLE Sense Rev2 with 2.4 on it. The reset button does not work on v2.4. It worked as intended on 2.1/2.2 but in the documents, it says there is a bug with this board and to use v2.4.

I have tried all channels in the "Send Recenter on Chan" dropdown. It used to be Chanel 7. Just flashed back and Chanel 7 works fine on 2.1.

How can I fix this or is there a fix?

Thanks,

Scott

[Tegalian]

I had the same issue. I ran the 2.4 configurator for Windows and I see that the reset button default has changed from D2 to D3 and can no longer be changed. I went back to v2.2 firmware and configurator and now it's working again. Hopefully 2.4 will go back to a configurable reset input or at least return the default to D2 to match existing wiring documentation.

[Mute916]

Replied on your other message. I've been using it without the reset button and only the proximity sensor, and to be honest, I actually like it better. BLE Sense Rev2

[dlktdr]

reset button default has changed from D2 to D3 and can no longer be changed.

Was a plan to release alternate firmware files with the two pins (Almost) everyone has wired to D2 or D3. Trying to support multiple boards with selectable pins was getting difficult so they are fixed now.

I have compiled firmware with D2 or D3 set as center. You can get them here. https://github.com/headtracker/HeadTracker/releases/tag/v2.40