SwitchBot plug mini (EU) shows incorrect Energy consumption statistics

[Jellest]

The problem

The energy reading for the smartplug mini is shown incorrect;ly in both the SwitchBot Bluetooth as well as the SwitchBot cloud integrattions. It should be a total increasing vale but charts show that it goes up and down, which is not correct.

Plug mini has SwitchBot's latest 0.8 firmware version.

In the iOS SwitchBot app, it correctly shows it's constant power op 10W. On August 12th for a period of 24 hours, this gives the following correct power graph.

Within Home assistant the following power graphs are shown
SwitchBot Bluetooth integration

and SwitchBot Cloud: integration

The expected energy consumption therefore is (10 W x 24 hours) / 1000W/kW = 0.24 kWh. Within the iOS SwitchBot app, this is again correctly shown for August 12th:

Within Home assistant the following energy consumption graphs are shown:

SwitchBot Bluetooth

SwitchBot Cloud:

These graphs are incorrect, also because the energy value should be a total_increasing value. As a result incorrect energy consumption values are registered.

What version of Home Assistant Core has the issue?

2026.8.1

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

SwitchBot Bluetooth and SwitchBot Cloud

Link to integration documentation on our website

https://www.home-assistant.io/integrations/switchbot and https://www.home-assistant.io/integrations/switchbot_cloud

Diagnostics information

SwitchBot Bluetooth: config_entry-switchbot-01KRW311MTDG8NP1J33ST1VF35.json

SwitchBot Cloud no diagnstic data file exists.

Example YAML snippet

Not applicable

Anything in the logs that might be useful for us?

None visible

Additional information

Issue was previously reported in late 2025 but closed due to inactivity
I can confirm that issue still exists.

[home-assistant]

Hey there @Danielhiversen, @RenierM26, @murtas, @Eloston, @dsypniewski, @zerzhang, mind taking a look at this issue as it has been labeled with an integration (switchbot) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of switchbot can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign switchbot Removes the current integration label and assignees on the issue, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information, problem in dependency, problem in custom component, problem in config, problem in device, feature-request) to the issue.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information, problem in dependency, problem in custom component, problem in config, problem in device, feature-request) on the issue.

_{^{(message by CodeOwnersMention)}}

---

@Jellest Thanks for reporting this issue!

Before we dive in, please make sure this isn't a duplicate by searching through existing issues. Also check recently closed issues, as your problem might already be fixed but not yet released.

https://github.com/home-assistant/core/issues?q=%20label%3A%22integration%3A%20switchbot%22%20
_{^{(message by IssueContext)}}

---

switchbot documentation
switchbot source
_{^{(message by IssueLinks)}}

[Jellest]

as mentioned the issue was previously reported but clsed due to inactivity.