Plug-In Battery firmware 1.0219 has been released as beta #17
Replies: 11 comments 10 replies
-
|
I just got an error, the E327 and E103. Just as i'm waiting on replacement of one of the other PiB's. |
Beta Was this translation helpful? Give feedback.
-
|
My battery 1 gave the error 326 and an orange upper ledblock blinking (time 12:25). Reported to Wizzy and followed instructions. Battery status is online but inactief and stays that way. No more errors atm, but not working. Tried also reset P1 en power off battery but no change. Battery 2 does the job now. Beta firmware 1.0219 in both batteries. P1 6.0205. |
Beta Was this translation helpful? Give feedback.
-
|
according to the helpdesk are E327 codes still possible and this will be solved in (again) next update? They know i have the 1.0219 FW. |
Beta Was this translation helpful? Give feedback.
-
|
Since 20:50 one of my batteries is inactive with a 37% charge. This is the fourth time since receiving this renewed battery. Last time support suggested this has to be reported to the beta channel so thats what I'm doing now. Both my batteries are on version 1.2019. Status in the energy app is working ok and inactive |
Beta Was this translation helpful? Give feedback.
-
|
Hier een screenshot vanuit de HomeWizard app. |
Beta Was this translation helpful? Give feedback.
-
|
This morning I got the E327 error on Battery 2 of 2. After reboot of the battery with the switch, everything is back to normal. |
Beta Was this translation helpful? Give feedback.
-
|
Got the E327 error the next day after the 2.019 update, charging was hanging on 43%. Powered off the P1 and the battery for 1 hour and is still working now. BTW first error ever after 140 cycles. |
Beta Was this translation helpful? Give feedback.
-
|
Since installing firmware 1.0218 there was an error with 1 of my pib’s. Workaround: If i do nothing this is for about 1 hour. Or a disconnect and connect off the wifi. To speed it up and get in working again. This firmware version 1.0219 should have fixed this. According to homewizard. But it does not. |
Beta Was this translation helpful? Give feedback.
-
|
Stating now, version |
Beta Was this translation helpful? Give feedback.
-
|
Sinds vannacht ontvang ik op drie batterijen constant de melding "P1 meter losgekoppeld". Heb de access points al even herstart maar zonder verbetering, ik kreeg zelfs op de batterijen de melding dat de veiligheidsrestrictie was gereset, Met de P1 meter is niets mis en is constant verbonden geweest na een onderbreking van mijzelf van de WiFi voor de P1 meter reageren de batterijen nog steeds niet. Vreemde is ook dat de app blijft aangeven dat er met 28-29 watt opgeladen wordt. P1 draait overigens op 6.0205. |
Beta Was this translation helpful? Give feedback.
-
|
Sinds update 219 al 2x een verschillende accu die e327 meldingen geeft ervoor nooit problemen gehad. |
Beta Was this translation helpful? Give feedback.


Uh oh!
There was an error while loading. Please reload this page.
-
New in Plug-In Battery 1.0219
How to install
The update will be installed automatically. To check if your device has the latest version and to install this version, follow these instructions: https://helpdesk.homewizard.com/en/articles/9167578-how-do-i-check-if-i-have-the-latest-software-on-my-homewizard-product. Your device must be signed up for the beta channel.
Feedback
Share your feedback below in English or Dutch during the beta period.
Beta Was this translation helpful? Give feedback.
All reactions