path planner allows user to set the desired movement speed to 0 and then crashes on the next move calculation #187
Description
With the attached gcode and redeem config (Umikaze 2.2.1-RC2) i get a serial error. Terminal log:
Changing monitoring state from "Operational" to "Printing from SD" Send: M23 /lcl/ae10_3dbenchy.gcodeRecv: File opened:/usr/share/models/AE10_3DBenchy.gcode Size:4786997 Recv: File selected[...] Send: M24[...] Recv: ok : M24 in progress[...] Recv: End stop Y1 hit![...] Recv: End stop X1 hit! Recv: End stop Y1 hit! Recv: End stop X1 hit![...] Recv: End stop Z1 hit![...] Recv: End stop Z1 hit![...] Unexpected error while writing to serial port: SerialException: 'write failed: [Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3228Please see https://faq.octoprint.org/serialerror for possible reasons of this.Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'read failed: [Errno 5] Input/output error' @ comm.py:_readline:2605Please see https://faq.octoprint.org/serialerror for possible reasons of this.Connection closed, closing down monitorChanging monitoring state from "Printing from SD" to "Offline (Error: SerialException: 'read failed: [Errno 5] Input/output error' @ comm.py:_readline:2605)"Closing down send loop