tewst

[keeeto]

VSI Testing

Preparation

• Get the scripts from the Mantid repository this
  directory.
• Make sure that you have the Mantid system test data. You can do this
  by building a SystemTestData target of Mantid.
• Put the system test data directory in your Mantid user directories

Time required 20-30 minutes

---

1. Load the script SXD_NaCl.py in MantidPlot. Run it.
2. This should load a workspace called QLab. Right-click this workspace
   and choose 'Show Vates simple interface'.
3. This should open the VSI window. Like the picture below. Check that
   all tabs are present.

1. Click the various tabs making sure that the interface does not
   crash.
2. Make sure all tabs have a tool tip when you hover over them.
3. Go into three slice mode (the star shaped tab at the top).
4. Play with the maximum and minimum parameters at the top of the plot,
   make sure the colours change in the plot.
5. Hover on each of the upper two plots and the lower left plot. While
   hovering over a plot use the roll bar (or equivalent), the slices in
   the other plots should update. The lower right plot should show all
   three slices. Check that the text on the plots is legible and
   updates appropriately.
6. Switch to multi-slice view (just to the left of three slice view).
   1. In the properties tab (left of the plot) select the Display
      menu.
   2. Choose all options for Representation, make sure they work.
   3. Change the Styling and Lighting sliders, make sure the picture
      updates.
   4. Next to Data Axes Grid click edit, this should open a new dialog
      of settings for the plot.
   5. Change some of the properties in this dialog and click apply,
      the plot should update accordingly.
   6. Make sure that the sliders for the plot work. These are the
      triangles on the scales above and to the left of the plot. Slide
      them and move through the plot.
   7. On the slider scale Shift+Right-click should add another slice
   8. Select the View menu.
   9. Turn on/off the orientation axes visibility, check that the
      little axes icon on the plot turns on and off.
   10. Check and uncheck the parallel camera box, make sure the view
       switches between perspective on and off.
7. Switch to standard view (left of multi-slice)
   1. In the Rebin drop-down (above the plot) select Fast Rebin and
      click Slice - a new MDScaleWorkspace should appear in the list
   2. In the Properties tab select Properties and change the X/Y/Z
      scaling factors, click Apply. The plot should distort
      accordingly.
   3. In the properties tab click Delete and the plot alterations
      should be removed from the plot.
   4. Repeat the previous three steps for the different Rebin options.
8. Close the VSI interface and then reopen as before. You are now in
   scatter plot mode.
   1. Under Properties, change the Number of Points and Top Percentile
      settings and see that the plot changes.
   2. Drag the peaks_qLab workspace from the main GUI onto VSI. This
      should show the peak position in the plot as points.
   3. Drag the peaks_qLab_integrated workspace from the main GUI
      onto VSI. This should show the peak positions in the plot as
      spheres.
9. Close the VSI GUI.