RP2040-Client.ino

/****************************************************************************************************************************
  RP2040-Client.ino
  For RP2040 with WiFiNINA module/shield.
  
  Based on and modified from Gil Maimon's ArduinoWebsockets library https://github.com/gilmaimon/ArduinoWebsockets
  to support STM32F/L/H/G/WB/MP1, nRF52, SAMD21/SAMD51, RP2040 boards besides ESP8266 and ESP32


  The library provides simple and easy interface for websockets (Client and Server).
  
  Built by Khoi Hoang https://github.com/khoih-prog/Websockets2_Generic
  Licensed under MIT license
 *****************************************************************************************************************************/
/****************************************************************************************************************************
	nRF52 Websockets Client

	This sketch:
        1. Connects to a WiFi network
        2. Connects to a Websockets server
        3. Sends the websockets server a message ("Hello to Server from ......")
        4. Prints all incoming messages while the connection is open

	Hardware:
        For this sketch you only need an nRF52 board.

	Originally Created  : 15/02/2019
	Original Author     : By Gil Maimon
	Original Repository : https://github.com/gilmaimon/ArduinoWebsockets

*****************************************************************************************************************************/

#include "defines.h"

#include <WebSockets2_Generic.h>

using namespace websockets2_generic;

WebsocketsClient client;

void onEventsCallback(WebsocketsEvent event, String data) 
{
  (void) data;
  
  if (event == WebsocketsEvent::ConnectionOpened) 
  {
    Serial.println("Connnection Opened");
  } 
  else if (event == WebsocketsEvent::ConnectionClosed) 
  {
    Serial.println("Connnection Closed");
  } 
  else if (event == WebsocketsEvent::GotPing) 
  {
    Serial.println("Got a Ping!");
  } 
  else if (event == WebsocketsEvent::GotPong) 
  {
    Serial.println("Got a Pong!");
  }
}

void setup() 
{
  Serial.begin(115200);
  while (!Serial && millis() < 5000);

  Serial.println("\nStarting RP2040-Client with WiFiNINA on " + String(BOARD_NAME));
  Serial.println(WEBSOCKETS2_GENERIC_VERSION);
  
  // check for the WiFi module:
  if (WiFi.status() == WL_NO_MODULE) 
  {
    Serial.println("Communication with WiFi module failed!");
    // don't continue
    return;
  }

  String fv = WiFi.firmwareVersion();
  if (fv < WIFI_FIRMWARE_LATEST_VERSION) 
  {
    Serial.println("Please upgrade the firmware");
  }

  Serial.print("Attempting to connect to SSID: ");
  Serial.println(ssid);

  // Connect to wifi
  WiFi.begin(ssid, password);

  // Wait some time to connect to wifi
  for (int i = 0; i < 15 && WiFi.status() != WL_CONNECTED; i++)
  {
    Serial.print(".");
    delay(1000);
  }

  if (WiFi.status() == WL_CONNECTED)
  {
    Serial.print("Connected to Wifi, IP address: ");
    Serial.println(WiFi.localIP());
    Serial.print("Connecting to WebSockets Server @");
    Serial.println(websockets_server_host);
  }
  else
  {
    Serial.println("\nNo WiFi");
    return;
  }

  // run callback when messages are received
  client.onMessage([&](WebsocketsMessage message) 
  {
    Serial.print("Got Message: ");
    Serial.println(message.data());
  });

  // run callback when events are occuring
  client.onEvent(onEventsCallback);
  
  // try to connect to Websockets server
  bool connected = client.connect(websockets_server_host, websockets_server_port, "/");
  
  if (connected) 
  {
    Serial.println("Connected!");
    
    String WS_msg = String("Hello to Server from ") + BOARD_NAME;
    client.send(WS_msg);
  } 
  else 
  {
    Serial.println("Not Connected!");
  }
}

void loop() 
{
  // let the websockets client check for incoming messages
  if (client.available()) 
  {
    client.poll();
  }
}