How to ssh to pi

[avinashdivakaran-glitch]

i tried to ssh to the pi. but it didn't work. enable the ssh in pi as well.

on pi side,

pi@raspberrypi:~$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
ether 52:54:00:12:34:56 txqueuelen 1000 (Ethernet)
RX packets 15 bytes 2299 (2.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27 bytes 2683 (2.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 41 base 0x1000 dma 0xff

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

on host side docker info,
"Networks": {
"bridge": {
"IPAMConfig": null,
"Links": null,
"Aliases": null,
"DriverOpts": null,
"GwPriority": 0,
"NetworkID": "",
"EndpointID": "",
"Gateway": "172.18.0.1",
"IPAddress": "172.18.0.2",
"MacAddress": "",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"DNSNames": null
}
}

[avinashdivakaran-glitch]

bro these are local ip address. with dynamic ips