-
I'm finishing up my Voron 2.4 and installed my nozzle cam for the first time. Initially I got video, but it was very slow and choppy so I tried changing formats and resolution. Once I restarted, I never got a picture again. I've reverted back to my original settings and I still have no picture. My crowsnest log shows some errors around parameters, but I can't find any problems anywhere. 03/12/24 19:38:38] crowsnest: [crowsnest] I've played around with different mode and resolutions in crowsnest, as well as different services and framerates in mainsail with no change. I've tried a sudo make buildclean build and restarting the service with no change in issue. I'm sure I did something stupid, I just can't find it. Any help would be appreciated. |
Beta Was this translation helpful? Give feedback.
Replies: 5 comments 3 replies
-
pls also upload your config file. the end of your logfile looks "strange"... |
Beta Was this translation helpful? Give feedback.
-
PS: is it possible, that you mixed up E3D and 3DO? I don't know any E3D Nozzle cam. |
Beta Was this translation helpful? Give feedback.
-
Besides the whole config file, also upload your log. Please upload them both as files and not just the content. |
Beta Was this translation helpful? Give feedback.
-
yes, crowsnest.cfg and crowsnest.log |
Beta Was this translation helpful? Give feedback.
-
@meteyou @mryel00 - Here's the files you requested. I trimmed down the log for today only. I was switching out cams, trying to get this to work before I left, so it was pretty long. Thanks again for taking a look at this. |
Beta Was this translation helpful? Give feedback.
It is like I already thought when you opened the issue. You trimmed the log at the worst place:
Like that you can clearly see, that there is something wrong here. The
l
shouldn't be there. You might wonder where thisl
comes from. It's in the first line of your config.So remove the
l
at the front of the first line and you fixed that specific error.