Mainsail-Crew
Replies: 1 comment
-
|
Might be a bit late, as I don't monitor the discussions actively. But here some explanation on this: I'm not entirely sure if that is still in place or if it worked consistently. |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
What happened?
I set up both cameras yesterday, it was all fine.
Pi Cam as /dev/video0
C270 as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0
Today I started klipper and the Pi again and now some how both cameras where still detected via the logs but got switched internally around.
Log:
Pi Cam -> /dev/video2
C270 -> /dev/video0 but still as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0
And the Pi Camera got no signal.
I used both in ustreamer mode and everything was fine with good fps (around 15).
I changed them around and the C270 was fine again.
But to get the Pi Cam back I have to use camera-streamer, but then both video feeds have low fps at under 5fps.
What did you expect to happen?
I expected both cameras would have the same video{Number} then yesterday because I didn't change anything.
They would be directly callable via /dev/video0 and as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0 for the C270.
I expected the same fps performance then yesterday and the same modes for both of them.
How to reproduce:
I'm not sure.
Happens to me sometimes when I power everything off for one day and would get back on it.
(And Yes I did a shutdown from mainsail UI and waited around 5min before pulling the power plug)
Additional information:
Raspberry Pi 4 B 2Gb
Logitec C270
Raspberry Pi Camera Module 5MP OV5647
crownsnest v4.1.9-gd75a3aeb
klipper v0.12.0-179-g434770ea
mainsail v2.11.2
mainsail-config v1.2.1-0-ge57810d5
moonraker v0.8.0-354-gba942855
sonar v0.1.3-1-geacc498a
System OS-Packages
Beta Was this translation helpful? Give feedback.
All reactions