diff --git a/examples/easy_wav_player.py b/examples/easy_wav_player.py
index 6053da1..3b31ad7 100644
--- a/examples/easy_wav_player.py
+++ b/examples/easy_wav_player.py
@@ -56,7 +56,7 @@
 
 elif os.uname().machine.count("Raspberry"):
     from sdcard import SDCard
-    from machine import SPI
+    from machine import SPI, ADC
 
     cs = Pin(13, machine.Pin.OUT)
     spi = SPI(
@@ -84,6 +84,10 @@
     I2S_ID = 0
     BUFFER_LENGTH_IN_BYTES = 40000
     # ======= I2S CONFIGURATION =======
+    
+    # ======= ADC CONFIGURATION =======
+    adc = ADC(0)  # ADC0 corresponds to GPIO26 on Raspberry Pi Pico
+    # ======= ADC CONFIGURATION =======
 
 elif os.uname().machine.count("MIMXRT"):
     from machine import SDCard
@@ -116,10 +120,14 @@
 # wait until the entire WAV file has been played
 while wp.isplaying() == True:
     # other actions can be done inside this loop during playback
+    adc_value = adc.read_u16()  # Read 16-bit ADC value (0-65535)
+    volume = adc_value / 65535  # Normalize to 0.0 - 1.0
+    wp.set_volume(volume)
+    time.sleep(0.05)
     pass
 
 wp.play("music-16k-16bits-mono.wav", loop=False)
 time.sleep(10)  # play for 10 seconds
 wp.pause()
 time.sleep(5)  # pause playback for 5 seconds
-wp.resume()  # continue playing to the end of the WAV file
+wp.resume()  # continue playing to the end of the WAV file
\ No newline at end of file
diff --git a/examples/wavplayer.py b/examples/wavplayer.py
index 68dd698..660f7f6 100644
--- a/examples/wavplayer.py
+++ b/examples/wavplayer.py
@@ -56,6 +56,46 @@ def __init__(self, id, sck_pin, ws_pin, sd_pin, ibuf, root="/sd"):
         # allocate audio sample array buffer
         self.wav_samples_mv = memoryview(bytearray(10000))
 
+        # Initialize volume control variable (0.0 to 1.0)
+        self.volume = 1.0
+        self.volume_int = 256  # 256 corresponds to 1.0 in fixed-point representation
+
+    def set_volume(self, volume):
+        if 0 <= volume <= 1:
+            self.volume = volume
+            self.volume_int = int(volume * 256)  # Scale to 0-256
+        else:
+            raise ValueError("Volume must be between 0.0 and 1.0")
+    
+    @micropython.viper
+    def adjust_volume_16bit(self, data_in: ptr8, length: int, volume_int: int):
+        data = ptr8(data_in)
+        n = int(length // 2)
+        for i in range(n):
+            # Read two bytes and combine them into a signed 16-bit integer
+            low = int(data[2 * i])
+            high = int(data[2 * i + 1])
+            sample = (high << 8) | low
+            if sample >= 32768:
+                sample -= 65536  # Convert to signed int16
+
+            # Adjust volume
+            sample = (sample * volume_int) >> 8
+
+            # Clip to int16 range
+            if sample > 32767:
+                sample = 32767
+            elif sample < -32768:
+                sample = -32768
+
+            # Convert back to unsigned int16
+            if sample < 0:
+                sample += 65536
+
+            # Store back into data buffer
+            data[2 * i] = sample & 0xFF
+            data[2 * i + 1] = (sample >> 8) & 0xFF
+
     def i2s_callback(self, arg):
         if self.state == WavPlayer.PLAY:
             self.num_read = self.wav.readinto(self.wav_samples_mv)
@@ -69,6 +109,10 @@ def i2s_callback(self, arg):
                     _ = self.wav.seek(self.first_sample_offset)
                 _ = self.audio_out.write(self.silence_samples)
             else:
+                # Adjust volume
+                if self.bits_per_sample == 16:
+                    volume_int = self.volume_int  # Integer between 0 and 256
+                    self.adjust_volume_16bit(self.wav_samples_mv, self.num_read, volume_int)
                 _ = self.audio_out.write(self.wav_samples_mv[: self.num_read])
         elif self.state == WavPlayer.RESUME:
             self.state = WavPlayer.PLAY
@@ -181,4 +225,4 @@ def isplaying(self):
         if self.state != WavPlayer.STOP:
             return True
         else:
-            return False
+            return False
\ No newline at end of file