Comment on HiLetgo PCM5102 I2S IIS Lossless Digital Audio DAC Decoder

[PRSXFENG]

Hi there I would just like to inform on some boards of this design, the H and L pads may be flipped, I was troubleshooting why no audio was coming out of my board, until I took a multi-meter to verify connections, and found that on my board, the H and L are flipped, with H being connected to GND

As such, I had to invert the connections for the board to function as expected

Just leaving this here in case anyone also faces this problem
Possibly related to the issue in #1641

[alw1746]

FYI, the Adafruit PCM5102 board, worked for me with just 3V,GND and 3 I2S pins. With the HiLetgo, I had to jumper SCK to GND and solder bridge XMT:H before it worked.

[pschatzmann]

I updated my documentation.