Temp limits Problem in Ver 0.250

[YXCXD]

when i set CPU's TEMP Limits to 85°C in balance mode and 90°C in enhance mode (R7 8845H)and set auto apply in ver 0.250,when i change the pattern i can see the Temp Limits worked immediately but fewer seconds ago it becomes 92°C and 97°C.(I read the limits by "Read Limits" button),not the Temp i set.but this function works in the ver 0.247

[YXCXD]

I tried more version find this problem first happened in Ver 0.248.

[seerge]

@YXCXD hello,

Check windows Task Scheduler app for any AMD related task, like ModifyLink, Ryzen etc. If you have any - stop / remove them and reboot.

Try if limit resets after.

[seerge]

@YXCXD try this build, it should reapply temp limit every 30 seconds for your CPU family

GHelper.zip

[YXCXD]

@YXCXD try this build, it should reapply temp limit every 30 seconds for your CPU family

GHelper.zip

log.txt
yeah,this one,when i set 85°C,i can see it turn to 85,than 2s ago it turns to 92°C，then 30s ago turns to 85°C

[seerge]

@YXCXD this is how any build prior to 0.248 worked.

[YXCXD]

@YXCXD this is how any build prior to 0.248 worked.

But why no Ryzen Limits' log shows before 0.248.

[seerge]

@YXCXD It's a reading. It appears in a log when you press Read Limits button under Fans + Power->Advanced (and it shows reading data to you directly)