Schedules not firing consistently

[flyboyusa]

I have a morning and evening schedule setup but at least half of the time, they don't trigger at all for some reason.
Sometimes they work, sometimes not. Screenshot attached from this morning as an example - it was supposed to start at 6am, but it didn't.

Any advice on what to check?

[flyboyusa]

Anyone have any suggestions?

[flyboyusa]

Yesterday I tried un-checking the "Manual Operation Priority" checkbox (screenshot below). This morning my schedule fired as it should. Fingers crossed this fixed it.
Also, I found some more documentation on this setting below.

[Telemachus1977]

In my case I already have that check box off.

I did try to read through that documentation, but honestly it didn't make much sense to me.

From what I can tell, neither one of those options should stop a schedule from doing what it's supposed to do.

From the data you posted, and looked like there were some error codes right when it was supposed to turn on.

[Telemachus1977]

I realized I was on version 8.0 of the software. Just did a git pull to bring it up to 8.1.

So far schedules are working okay. What version are you on?

[flyboyusa]

I'm on 8.1.0
I'm having hard time reading the logs I posted, I'll check them again and see if I see the errors you mentioned.
Mine's been working for 3 days in a row now, so I might be good to go.

[nlemberger]

I'm having similar issues on 8.1.0 with schedules not firing consistently. If use dashPanel and save a schedule without any modification during a time when it's supposed to be running, it starts and ends but never kicks off again the next day. My install was a fresh clone/install of 8.1.0 on RPI. I see nothing in the logs related to scheduling, or any other non-repeat/differences in logging around the start time of the schedules.

[tagyoureit]

Grab version 8.1.1. I fixed this.

[tagyoureit]

You need to delete/resave the schedule for it to update.

[Telemachus1977]

Thanks!!