Sanity Check with Configuration

[EPiSKiNG]

I am super thrilled about njspc and have been using it for about 2 years now. Love it so much!

Just wanted to see if I have my configuration set up correctly or see if there's a better way for me to be programming the circuits/pump/etc. Started out with just the pump, and I've added temps, pressure, IntelliValves along the way.

The following end results are currently functional (with the exception of the Egg Timer, which for some reason never shuts off even after the timer expires)

• Daily High Speed (40gpm) for 30 minutes
• Daily Low Speed (20gpm) for 1.5 hours.
• Egg Timer (3 hours) at high speed (40gpm)
• Spa Mode:
• • 39 gpm
• • Intake Valve (IntelliValve) - Startup State Relay Off
• • Return Valve (IntelliValve) - Startup State Relay Off
• • Heater (fireman switch), start delay 90 seconds.
• Home Assistant HACS Addon Integration (LOVE LOVE LOVE) :)

Here are some screenshots:

No Features

No Circuit Groups

No Light Groups

No Chemistry (YET evil grin )

Thanks in advance!

[tagyoureit]

You've got a pretty basic setup and there's no reason to change anything. Looks good.

with the exception of the Egg Timer, which for some reason never shuts off even after the timer expires

This is because you have "Don't Stop" checked for the aux circuits.

[EPiSKiNG]

The Egg Timer (Quick Clean) aux circuit is not checked as "Don't Stop". Do the other circuits need to be unchecked for the Egg Timer circuit to be timed?

Thank you!!

[tagyoureit]

Attach a packet capture (see wiki) with the egg timer not working and I can take a look.