Skip to content

Commit 3059c9b

Browse files
authored
Merge pull request #1436 from legacycode/added-lupus-2060
Added script for Apator LUPUS 3.060 configuration
2 parents fbcc681 + e491bd7 commit 3059c9b

File tree

1 file changed

+87
-0
lines changed

1 file changed

+87
-0
lines changed

docs/Smart-Meter-Interface.md

Lines changed: 87 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -458,6 +458,93 @@ Energy provider supplied a PIN code to enable output of additional data.
458458
#
459459
```
460460

461+
### Apator Lupus 3.060 (SML)
462+
463+
Instructions for Activating the Instantaneous Power Display and Disabling the PIN Protection. For more details and additional instructions, you can download the user manual from the internet.
464+
465+
**Important Note**:
466+
Entering the PIN with a flashlight is **not** sufficient to permanently display the instantaneous power or disable the PIN protection.
467+
468+
Please follow the steps below. For more details, refer to the user manual of the meter, which is available for download online.
469+
470+
1. To start, press and hold the **left arrow button** for **more than 5 seconds** to access the parameter menu. A display test will briefly show the top and bottom lines of the display.
471+
472+
2. If PIN protection is active, you will be prompted to enter the PIN. Use **short button presses** to select the correct digits. After about 2 seconds of no input, the cursor will automatically move to the next digit.
473+
474+
3. To activate the instantaneous power display, navigate to the **"Inf"** menu option and press and hold the **left arrow button for more than 5 seconds**. This will enable the **"Inf on"** setting, which will display the instantaneous power on the second line of the display permanently.
475+
476+
4. To disable PIN protection, navigate to the **"Pin"** menu option and press and hold the **left arrow button for more than 5 seconds**. This will turn off the PIN protection.
477+
478+
After following these steps, the instantaneous power will be displayed permanently in the second line of the display.
479+
480+
??? summary "View script in English"
481+
```
482+
>D
483+
>B
484+
->sensor53 r
485+
>M 1
486+
+1,3,s,1,9600,SML
487+
1,77070100100700FF@1,Power Consumption,W,Current_Active_Power,16
488+
1,77070100240700FF@1,Phase 1,W,Active_Power_L1,0
489+
1,77070100380700FF@1,Phase 2,W,Active_Power_L2,0
490+
1,770701004C0700FF@1,Phase 3,W,Active_Power_L3,0
491+
1,=h ----
492+
1,77070100010800FF@1,Total Consumption,Wh,Total_Consumption,1
493+
1,77070100020800FF@1,Feed-in,Wh,Total_Active_Energy,1
494+
1,=h ----
495+
1,770701000E0700FF@1,Grid Frequency,Hz,Grid_Frequency,1
496+
1,770701001F0700FF@1,Current L1,A,Current_L1,2
497+
1,77070100330700FF@1,Current L2,A,Current_L2,2
498+
1,77070100470700FF@1,Current L3,A,Current_L3,2
499+
1,77070100200700FF@1,Voltage L1,V,Voltage_L1,1
500+
1,77070100340700FF@1,Voltage L2,V,Voltage_L2,1
501+
1,77070100480700FF@1,Voltage L3,V,Voltage_L3,1
502+
1,77070100510701FF@1,Delta Phi U L1/L2,°,Delta_Phi_U_L1_L2,0
503+
1,77070100510702FF@1,Delta Phi U L1/L3,°,Delta_Phi_U_L1_L3,0
504+
1,77070100510704FF@1,Delta Phi I/U L1,°,Delta_Phi_I_U_L1,0
505+
1,7707010051070FFF@1,Delta Phi I/U L2,°,Delta_Phi_I_U_L2,0
506+
1,7707010051071AFF@1,Delta Phi I/U L3,°,Delta_Phi_I_U_L3,0
507+
1,77070100600100ff@#,Server ID,,Server_ID,0
508+
1,7707010060320101@#,Service ID,,Meter_ID,0
509+
1,77070100605a0201@1,Firmware Checksum,,FwCheck,0
510+
#
511+
```
512+
513+
??? summary "View script in German"
514+
```
515+
>D
516+
>B
517+
->sensor53 r
518+
>M 1
519+
+1,3,s,1,9600,SML
520+
1,77070100100700FF@1,Stromverbrauch,W,aktuelle_Wirkleistung,16
521+
1,77070100240700FF@1,Leiter 1,W,Wirkleistung_L1,0
522+
1,77070100380700FF@1,Leiter 2,W,Wirkleistung_L2,0
523+
1,770701004C0700FF@1,Leiter 3,W,Wirkleistung_L3,0
524+
1,=h ----
525+
1,77070100010800FF@1,Zähler Verbrauch,Wh,Zaehlerstand_total,1
526+
1,77070100020800FF@1,Zähler Einspeisung,Wh,Wirkenergie_total,1
527+
1,=h ----
528+
1,770701000E0700FF@1,Netz Frequenz,Hz,Netz_Frequenz,1
529+
1,770701001F0700FF@1,Strom L1,A,Strom_L1,2
530+
1,77070100330700FF@1,Strom L2,A,Strom_L2,2
531+
1,77070100470700FF@1,Strom L3,A,Strom_L3,2
532+
1,77070100200700FF@1,Spannung L1,V,Spannung_L1,1
533+
1,77070100340700FF@1,Spannung L2,V,Spannung_L2,1
534+
1,77070100480700FF@1,Spannung L3,V,Spannung_L3,1
535+
1,77070100510701FF@1,delta phi U L1/L2,°,delta_phi_U_L1-L2,0
536+
1,77070100510702FF@1,delta phi U L1/L3,°,delta_phi_U_L1-L3,0
537+
1,77070100510704FF@1,delta phi I/U L1,°,delta_phi_I_U_L1,0
538+
1,7707010051070FFF@1,delta phi I/U L2,°,delta_phi_I_U_L2,0
539+
1,7707010051071AFF@1,delta phi I/U L3,°,delta_phi_I_U_L3,0
540+
1,77070100600100ff@#,Server ID,,Server_ID,0
541+
1,7707010060320101@#,Service ID,,Meter_ID,0
542+
1,77070100605a0201@1,Firmware Checksum,,FwCheck,0
543+
#
544+
```
545+
546+
For further support, visit the [APATOR LEPUS Discussion Thread](https://github.com/arendst/Tasmota/discussions/17635).
547+
461548
### Apator Norax 3D (SML)
462549

463550
??? summary "View script"

0 commit comments

Comments
 (0)