uboot.log

console init done


U-Boot 2012.10 (Sep 29 2006 - 00:20:41) for GK7102 rb jxh42 v1.00 (GOKE)

HAL:  20151223 
DRAM:  64 MiB
Flash: support 4X mode read:0xe520f1ff
16 MiB
16 MiB
NAND:  SPINAND MID = 0xff, DID = 0xffff, Data = 0x1ffffff !spinand_board_init[1581]: No support this SPI nand!
SF: Detected MX25L12845 with page size 256 B, sector size 64 KiB, total size 16 MiB
In:    serial
Out:   serial
Err:   serial
Net:   arm_freq(600MHz)..............0x112032
use int MII..............
gk7101
Hit any key to stop autoboot:  1  0
Gwell7102 # 
Gwell7102 # 
Gwell7102 # 
Gwell7102 # 



Gwell7102 # help
[PROCESS_SEPARATORS] help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
bootz   - boot Linux zImage image from memory
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
erase   - erase FLASH memory
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print command description/usage
iminfo  - print header information for application image
imls    - list all images found in flash
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sf      - SPI flash sub-system
sleep   - delay execution for some time
snand   - SpiNAND sub-system
source  - run script from memory
tftpboot- boot image via network using TFTP protocol
version - print monitor, compiler and linker version





Gwell7102 # bdinfo
[PROCESS_SEPARATORS] bdinfo
arch_number = 0x00000F94
boot_params = 0xC0000100
DRAM bank   = 0x00000000
-> start    = 0xC0000000
-> size     = 0x04000000
ethaddr     = 3C:97:0E:XX:XX:XX
ip_addr     = 192.168.1.229
baudrate    = 115200 bps
relocaddr   = 0xC0800000
reloc off   = 0x00000000
irq_sp      = 0xC3F3FF68
sp start    = 0xC3F3FF58
FB base     = 0x00000000



Gwell7102 # flinfo
[PROCESS_SEPARATORS] flinfo

Bank # 1: flash_print_info()



Gwell7102 # coninfo
[PROCESS_SEPARATORS] coninfo
List of available devices:
serial   80000003 SIO stdin stdout stderr 



Gwell7102 # version
[PROCESS_SEPARATORS] version

U-Boot 2012.10 (Sep 29 2006 - 00:20:41) for GK7102 rb jxh42 v1.00 (GOKE)
arm-goke-linux-uclibcgnueabi-gcc (crosstool-NG 1.18.0) 4.6.1
GNU ld (crosstool-NG 1.18.0) 2.21.1



Gwell7102 # printenv
[PROCESS_SEPARATORS] printenv
arm_freq=0x00112032
baudrate=115200
bootargs=console=ttySGK0,115200 noinitrd mem=38M root=/dev/mtdblock3 rootfstype=squashfs mtdparts=gk7101_flash:256K(boot),64K(bootenv),2560K(kernel),7168K(rootfs),1024K(rom),5312K(APP) phytype=0
bootcmd=run sfboot
bootdelay=1
bootfile=zImage
bsbsize=2M
consoledev=ttySGK0
ethact=gk7101
ethaddr=3C:97:0E:XX:XX:XX
fileaddr=C1000000
filesize=3AC000
gatewayip=192.168.1.1
hostname="gk7101"
ipaddr=192.168.1.229
loadaddr=0xC1000000
mem=35M
mtdparts=gk7101_flash:256K(boot),64K(bootenv),2M(kernel),7M(rootfs),1M(rom),5824K(APP)
netdev=eth0
netmask=255.255.255.0
nfsserver=11.1.4.19
phytype=0
rootfstype=mtdparts=gk7101_flash:256K(boot),64K(bootenv),2560K(kernel),7168K(rootfs),1024K(rom),5312K(APP) rootfstype=squashfs root=/dev/mtdblock3
rootpath=/home/star/nfs/gk/rootfs_uClibc_v112/
serverip=192.168.1.225
sfboot=setenv bootargs console=${consoledev},${baudrate} noinitrd mem=${mem} rw ${rootfstype} init=linuxrc ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev} mac=${ethaddr} phytype=${phytype};sf probe 0 0;sf read ${loadaddr} ${sfkernel} ${filesize}; bootm
sfkernel=0x50000
soctype=1
stderr=serial
stdin=serial
stdout=serial
tftpboot=setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:${rootpath},proto=tcp,nfsvers=3,nolock ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev} mac=${ethaddr} phytype=${phytype} console=${consoledev},${baudrate} mem=${mem};tftpboot ${bootfile};bootm

Environment size: 1524/65532 bytes



Gwell7102 # base
[PROCESS_SEPARATORS] base
Base Address: 0x00000000



Gwell7102 # iminfo
[PROCESS_SEPARATORS] iminfo

## Checking Image at c1000000 ...
Unknown image format!