This project is about adding ISA slots to modern motherboards, by using the TPM header which have LPC pins.
Everything related to hardware (Kicad/gerber files) can be found under Hardware.
Before using the sound card with the adapter, it needs to be initialized using SAPPHISA.EXE, which can be found under software.
You need a TPM header, with the LPC pins exposed. Most notable is the LDRQ pin, which is required to get IRQ working. On some motherboards there are pins that are marked as NC (no connect) that are actually connected to the LDRQ pin.
For now only Intel motherboard with a pre-PCH100 chipset are known to expose these pins. The possibly latest/fastest are X99 motherboards, newer ones will probably never expose the correct pins since Intel dropped support after.
AMD motherboards have been tested but are known not to work.
| Brand | Type | LDRQ location | Free IRQ status | Test status |
|---|---|---|---|---|
| Foxconn | H61MXV | TPM Header | OK | Confirmed by rasteri |
| Gigabyte | GA-Z77X-D3H | Not on TPM header | OK | Confirmed by rasteri |
| DFI | HD100 | Via backside | OK | Confirmed by rasteri |
| Asrock | Z87M-Pro4 | ? | OK | Confirmed by vsharun |
| Asrock | B85M Pro4 | ? | OK | Confirmed by vsharun |
| Gigabyte | B85M D3H | ? | OK | Confirmed by vsharun |
| RUBY-9719VG2AR Confirmed by LSS10999 |
| Brand | Type | LDRQ location | Free IRQ status | Test status |
|---|---|---|---|---|
| Gigabyte | GA-P67A-D3-B3 | Not on TPM header | ? | Tested by RayeR |
The following boards have a DLRQ pin on the TPM header:
| Brand | Type | LDRQ location | Test status |
|---|---|---|---|
| SuperMicro | X9DRL-3F | TPM header | Untested |
| SuperMicro | X10SKK-F | TPM header | Untested |
| SuperMicro | X10SAE | TPM header | Untested |
| SuperMicro | X10SLH | TPM header | Untested |
| SuperMicro | X10SRA | TPM header | Untested |
| Asrock | Z87M Pro4 | Not on TPM header | Untested |
| RUBY-9719VG2AR |
The following board have a TPM header, but have DLRQ pins missing. Potentially these could be modded to support it, but this will require soldering a jumper wire somewhere on the board:
- MSI P55-GD85
- MSI B75MA-E33
- ASRock J3455B-ITX (does have blank LPC pins on MB with TPM header next to it)
- Asus P8B-WS
- MSI X58 Pro
- MSI H87-G43
- Gigabyte Z77M-D3H
- Gigabyte Z68A-GD65 (G3)
- Asus Prime Z270-A
- ASUS Z170-A
- Gigabyte GA-B150-HD3P
- ASRock Z77 Extreme6
- ASRock H61M-S
- Asus P5Q3 Deluxe/WiFi-AP
- Asus P5KPL-AM EPU
- Asus P5KPL-VM
- Biostar B75MU3B
- Gigabyte GA-X58A-UD7`