Rename many user visible parts to "linuxcnc"

this includes the main script, some of the GUIs, the Python module, the Tcl package, some image fies. On a sim system, axis, tkemc, xemc all start. runtests pass. a system with realtime wasn't yet tested. packaging probably requires additional changes and was not yet tested.
ElectronicsArchiver · Jan 18, 2012 · 51fc09f · 51fc09f
1 parent 402b6cd
commit 51fc09f
Show file tree

Hide file tree

Showing 218 changed files with 735 additions and 733 deletions.
diff --git a/README b/README
@@ -81,5 +81,5 @@ In the source directory, build EMC2:
 
 to run the software go back to the top level directory, and issue:
 
-  . scripts/emc-environment
+  . scripts/rip-environment
   emc
diff --git a/configs/5axis/5axis.ini b/configs/5axis/5axis.ini
@@ -51,7 +51,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX = ../../nc_files/
 
 #- Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 EDITOR = gedit
 

diff --git a/configs/Sherline3Axis/Sherline3Axis_inch.ini b/configs/Sherline3Axis/Sherline3Axis_inch.ini
@@ -37,7 +37,7 @@ DISPLAY =              axis
 CYCLE_TIME =            0.200
 
 #- Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 #- Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files/
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 

diff --git a/configs/Sherline3Axis/Sherline3Axis_mm.ini b/configs/Sherline3Axis/Sherline3Axis_mm.ini
@@ -37,7 +37,7 @@ DISPLAY =              axis
 CYCLE_TIME =            0.200
 
 #- Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 #- Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 

diff --git a/configs/Sherline4Axis/Sherline4Axis_inch.ini b/configs/Sherline4Axis/Sherline4Axis_inch.ini
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.20
 PROGRAM_PREFIX = ../../nc_files
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 GEOMETRY = AXYZ

diff --git a/configs/Sherline4Axis/Sherline4Axis_mm.ini b/configs/Sherline4Axis/Sherline4Axis_mm.ini
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.20
 PROGRAM_PREFIX = ../../nc_files
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 GEOMETRY = AXYZ

diff --git a/configs/SherlineLathe/SherlineLathe_inch.ini b/configs/SherlineLathe/SherlineLathe_inch.ini
@@ -37,7 +37,7 @@ DISPLAY =              axis
 CYCLE_TIME =            0.200
 LATHE = 1
 #- Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 #- Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 

diff --git a/configs/SherlineLathe/SherlineLathe_mm.ini b/configs/SherlineLathe/SherlineLathe_mm.ini
@@ -37,7 +37,7 @@ DISPLAY =              axis
 CYCLE_TIME =            0.200
 LATHE = 1
 #- Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 #- Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 

diff --git a/configs/boss/boss.ini b/configs/boss/boss.ini
@@ -29,7 +29,7 @@ DISPLAY =              tkemc
 CYCLE_TIME =            0.0500
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -44,7 +44,7 @@ MAX_FEED_OVERRIDE =     1.5
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/boss/pid_test.ini b/configs/boss/pid_test.ini
@@ -29,7 +29,7 @@ DISPLAY =              tkemc
 CYCLE_TIME =            0.0500
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -44,7 +44,7 @@ MAX_FEED_OVERRIDE =     1.5
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/classicladder/cl-estop/cl-estop.ini b/configs/classicladder/cl-estop/cl-estop.ini
@@ -12,7 +12,7 @@ EDITOR = gedit
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 MAX_FEED_OVERRIDE = 1.2
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 PROGRAM_PREFIX = /home/jet/emc2/nc_files
 INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in

diff --git a/configs/cooltool/Basic540_3axes.ini b/configs/cooltool/Basic540_3axes.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Basic540_4axes.ini b/configs/cooltool/Basic540_4axes.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-cnc-set.ini b/configs/cooltool/Uni-cnc-set.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     10.0
 PROGRAM_PREFIX =        ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-dreh-g.ini b/configs/cooltool/Uni-dreh-g.ini
@@ -50,7 +50,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        /usr/share/emc/nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-dreh.ini b/configs/cooltool/Uni-dreh.ini
@@ -50,7 +50,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-fraes-4.ini b/configs/cooltool/Uni-fraes-4.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     10.0
 PROGRAM_PREFIX =        /usr/share/emc/nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-fraes-h3.ini b/configs/cooltool/Uni-fraes-h3.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        /usr/share/emc/nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-fraes-v3.ini b/configs/cooltool/Uni-fraes-v3.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/cooltool/Uni-mill-cnc.ini b/configs/cooltool/Uni-mill-cnc.ini
@@ -49,7 +49,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX =        /usr/share/emc/nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/dallur-thc/dallur-advanced.ini b/configs/dallur-thc/dallur-advanced.ini
@@ -37,7 +37,7 @@ RS274NGC_STARTUP_CODE = M52 P1
 CYCLE_TIME =            0.200
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 2
 
 # Increments for the JOG section

diff --git a/configs/demo_mazak/demo_mazak.ini b/configs/demo_mazak/demo_mazak.ini
@@ -34,7 +34,7 @@ DISPLAY =               axis
 CYCLE_TIME =            0.100
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -52,7 +52,7 @@ PROGRAM_PREFIX = ../../nc_files/
 PYVCP=panel.xml
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 1
 
 EDITOR = gedit

diff --git a/configs/demo_sim_cl/demo_sim_cl.ini b/configs/demo_sim_cl/demo_sim_cl.ini
@@ -30,7 +30,7 @@ DEBUG = 0
 CYCLE_TIME =            0.200
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -45,7 +45,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 2
 
 # Editor to be used with Axis

diff --git a/configs/demo_step_cl/demo_step_cl.ini b/configs/demo_step_cl/demo_step_cl.ini
@@ -30,7 +30,7 @@ DEBUG = 0
 CYCLE_TIME =            0.200
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -45,7 +45,7 @@ MAX_FEED_OVERRIDE =     1.2
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 2
 
 # Task controller section -----------------------------------------------------

diff --git a/configs/etch-servo/etch.ini b/configs/etch-servo/etch.ini
@@ -52,7 +52,7 @@ MAX_FEED_OVERRIDE =     10
 PROGRAM_PREFIX = ../../nc_files/
 
 #- Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5
 
 # Editor to be used with Axis

diff --git a/configs/gantry/gantry-hs.ini b/configs/gantry/gantry-hs.ini
@@ -11,7 +11,7 @@ EDITOR = gedit
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 MAX_FEED_OVERRIDE = 1.2
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 PROGRAM_PREFIX = /home/john/emc2/nc_files
 INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in

diff --git a/configs/gantry/gantry.ini b/configs/gantry/gantry.ini
@@ -10,7 +10,7 @@ EDITOR = gedit
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 MAX_FEED_OVERRIDE = 1.2
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 PROGRAM_PREFIX = /home/john/emc2/nc_files
 INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in

diff --git a/configs/gladevcp/touchy.ini b/configs/gladevcp/touchy.ini
@@ -18,7 +18,7 @@ DISPLAY = touchy
 
 PROGRAM_PREFIX = ../../nc_files/
 
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 
 # EMBED_TAB_NAME = Tools

diff --git a/configs/halui_pyvcp/halui.ini b/configs/halui_pyvcp/halui.ini
@@ -29,7 +29,7 @@ MAX_SPINDLE_OVERRIDE =     1.2
 # Prefix to be used
 PROGRAM_PREFIX = ../../nc_files/
 # Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 5
 #uncomment the next line if you're using AXIS, and you want the vcp embedded
 #PYVCP = vcp.xml

diff --git a/configs/hexapod-sim/minitetra.ini b/configs/hexapod-sim/minitetra.ini
@@ -39,7 +39,7 @@ DEBUG = 0
 CYCLE_TIME =            0.200
 
 #- Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 #- Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       MACHINE
@@ -54,7 +54,7 @@ MAX_FEED_OVERRIDE =     2.0
 PROGRAM_PREFIX = ../../nc_files/
 
 #- Introductory graphic
-INTRO_GRAPHIC = emc2.gif
+INTRO_GRAPHIC = linuxcnc.gif
 INTRO_TIME = 0.1
 
 ###############################################################################

diff --git a/configs/hm2-servo/3x20-small.ini b/configs/hm2-servo/3x20-small.ini
@@ -29,7 +29,7 @@ DISPLAY =              axis
 CYCLE_TIME =            0.0500
 
 # Path to help file
-HELP_FILE =             tkemc.txt
+HELP_FILE =             tklinucnc.txt
 
 # Initial display setting for position, RELATIVE or MACHINE
 POSITION_OFFSET =       RELATIVE
@@ -44,7 +44,7 @@ MAX_FEED_OVERRIDE =     1.5
 PROGRAM_PREFIX = ../../nc_files/
 
 # Introductory graphic
-INTRO_GRAPHIC =         emc2.gif
+INTRO_GRAPHIC =         linuxcnc.gif
 INTRO_TIME =            5