The Community Emissions Data System (CEDS) produces consistent estimates of global air emissions species (BC, CO, CO2, NH3, NMVOC, NOx, OC, SO2) over the industrial era (1750 - present) along with CH4 and N2O over recent decades. The system is written in R and uses open-source data (with the exception of the IEA energy statistics which must be purchased from IEA). CEDS is publicly available through an Open Source License.
July 2024 Release: July 08, 2024 (v_2024_07_08)
This data and code release updates small issues with the preliminary April 01, 2024 release, which extended emissions to 2022.
- Corrected a historical GBR SO2 discontinuity before 1850 in smelting SO2 emissions
- Other small historical corrections to smelting SO2 before 1850
- Small corrections to historical NOx and NH3 emissions
For details on this release see:
- See the release notes for a summary of data and methodology changes.
- Graphs of emission differences between this version and the previous major release (v_2021_04_20) and the CEDS CMIP6 data release as documented in Hoesly et al (2018a).
- Emissions by country, fuel and sector, archived here.
We encourage comments on this data. The best way to comment on the data is through the CEDS Issues page.
Gridded data corresponding to this release will be released shortly.
A journal paper describing this dataset is in preparation. A notice will be updated here and sent to the CEDS listserv when this is available.
Documentation of CEDS assumptions and system operation, including a user guide, are available at the CEDS project wiki and in the journal papers noted below.
Current issues with the data or system are documented in the CEDS Issues system in this GitHub repository. Users can submit issues using this system. These can include anomalies found in either the aggregate or gridded emissions data. Please use an appropriate tag for any submitted issues. Note that by default only unresolved issues are shown. All issues, including resolved issues, can be viewed by removing the "is:open" filter. Issues relevant for CMIP6 data releases are tagged with a “CMIP6” label (note that issues will be closed when resolved in subsequent CEDS data releases, but are still available for viewing.)
Further information can also be found at the project web site, including a link to a page that provides details for obtaining gridded emission datasets produced by this project. You can also sign up for data release announcements from the CEDSinfo listserv following the instructions on the project web site.
If you plan to use the CEDS data system for a research project you are encouraged to contactRachel Hoesly or Steve Smith so that we can coordinate with any on-going work on the CEDS system and make sure we are not duplicating effort. CEDS is research software, and we will be happy to help and make sure that you are able to make the best possible use of this system.
Users should use the most recent version of this repository, which will include maintenance updates to address documentation or usability issues. Major changes that alter emission estimates or system structure and use will be noted in the release notes.
CEDS has only been possible through the participation of many collaborators. Our collaboration policy is that collaborators who contribute unpublished data used in CEDS updates will be included as co-authors on the journal paper that describes the next CEDS major release. We particularly encourage contributions of updated emission information from countries or sectors not well represented in the data currently used in CEDS.
A reference for this data version can be found in the release notes.
Hoesly et al, Historical (1750–2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS). Geosci. Model Dev. 11, 369-408, 2018a.
Note that the paper zip file supplement contains annual emissions estimates by country and sector for the July 26, 2016 data version. Preivous versions of the data are otherwise available from the links below.
Related Papers
Hoesly et al Informing energy consumption uncertainty: an analysis of energy data revisions.” Environ. Res. Lett. 13 124023, 2018b.
Feng et al, The generation of gridded emissions data for CMIP6. Geosci. Model Dev. 13, 461–482, 2020.
Previous Versions
April 2024 Release: April 1, 2024 (v_2024_04_01)
This data and code release updates driver and emissions data throughout and extends the emissions time series to 2022.
Major features include:
- Emissions estimates to 2022
- Updated default data from IEA, Energy Institute, EDGAR, and others
- Updates to country inventories used for scaling
- Refined recent year extension of liquid fuels
- Emissions data now released with fuel and sector detail
- Expanded representation of the metal smelting sector
April 2021 Release: April 21, 2021 (v_2021_04_21)
This release updates emissions for four isos: Australia, Canada, South Korea, and Taiwan as shown in Figure S9 here. Global trends are similar to the v_2021_02_05 release. Global gridded emission data have also been produced with updated spatial distributions for most sectors.
- See the release notes for a summary of changes.
- Graphs of emission differences between this version and the CEDS CMIP6 data release documented in Hoesly et al (2018a).
- Graphs of emission differences between this version and the previous December 2019 CEDS data release.
- Emissions by country and sector, archived here.
- Gridded emissions in the same format as the CMIP6 data release are available at PNNL DataHub.
Feb 2021 Release: February 05, 2021 (v_2021_02_05)
This data and code release extends the emissions time series to 2019 and updates driver and emissions data throughout. This version builds on the extension of the CEDS system to 2017 described in McDuffie et al. 2020. Major features:
- Emissions estimates to 2019
- Updated default data from GAINS and EDGAR
- Updates to country inventories used for scaling
- Improved BC/OC emission time series
- Improved consistency over time
- Updated code and driver data
For details on this release see:
- See the release notes for a summary of changes.
- Graphs of emission differences between this version and the CEDS CMIP6 data release documented in Hoesly et al (2018a).
- Graphs of emission differences between this version and the previous December 2019 CEDS data release.
- Emissions by country and sector, archived here.
We encourage comments on this data. The best way to comment on the data is through the CEDS Issues page.
Gridded data corresponding to this release is in production and will be released shortly.
Copyright © 2017, Battelle Memorial Institute All rights reserved.
-
Battelle Memorial Institute (hereinafter Battelle) hereby grants permission to any person or entity lawfully obtaining a copy of this software and associated documentation files (hereinafter “the Software”) to redistribute and use the Software in source and binary forms, with or without modification. Such person or entity may use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and may permit others to do so, subject to the following conditions:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimers.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Other than as used herein, neither the name Battelle Memorial Institute or Battelle may be used in any form whatsoever without the express written consent of Battelle.
-
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BATTELLE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.