Bump csharpier from 0.30.6 to 1.0.1

[dependabot]

Bumps csharpier from 0.30.6 to 1.0.1.

Release notes

Sourced from csharpier's releases.

1.0.1

What's Changed

CSharpier's support for .gitignore is causing performance issues #1584

The support for .gitignore has some major performance problems when there are a large number of .gitignore files and/or ignore rules. The feature has been disabled for now until it can be fixed.

CSharpier.MsBuild issues #1586

CSharpier.MsBuild was not properly logging errors when performing a formatting check. This would result in the build passing when files were not formatted. Setting CSharpier_LogLevel was passing an invalid parameter of --loglevel to CSharpier, resulting in a build failure

Full Changelog: belav/csharpier@1.0.0...1.0.1

1.0.0

Major Changes

Support for formatting XML #819

CSharpier now formats xml files by default. It will try to format ".csproj", ".props", ".targets", ".xml", ".config" as if they were xml.
If a file is not valid xml it will be treated as a warning.
The default indent size is 2 instead of 4

Performance Improvements

@​TimothyMakkison put a lot of effort into improving the performance of CSharpier. These benchmark numbers show drastic improvement for both speed and memory usage.

Baseline

| Method                        | Mean     | Error   | StdDev  | Median   | Gen0       | Gen1      | Gen2      | Allocated |
|------------------------------ |---------:|--------:|--------:|---------:|-----------:|----------:|----------:|----------:|
| Default_CodeFormatter_Tests   | 233.3 ms | 4.63 ms | 8.23 ms | 229.7 ms | 11000.0000 | 4000.0000 | 1000.0000 | 101.41 MB |
| Default_CodeFormatter_Complex | 433.7 ms | 8.53 ms | 7.56 ms | 433.4 ms | 20000.0000 | 5000.0000 | 1000.0000 | 182.44 MB |

After Improvements

| Method                        | Mean      | Error    | StdDev   | Gen0      | Gen1      | Allocated |
|------------------------------ |----------:|---------:|---------:|----------:|----------:|----------:|
| Default_CodeFormatter_Tests   |  64.72 ms | 0.548 ms | 0.512 ms | 1666.6667 | 1000.0000 |  18.33 MB |
| Default_CodeFormatter_Complex | 137.83 ms | 2.730 ms | 4.708 ms | 3000.0000 | 1000.0000 |  30.78 MB |

Breaking Changes

ConfigurationFile - rename TabWidth to IndentSize #1377

In order to get consistency between an .editorconfig and .csharpierconfig the option TabWidth has been renamed to IndentSize. This is also a more accurate name considering by default indentation is done with spaces and not tabs.

Rework the CLI to use commands and arguments. #1321

The CLI has been reworked to use commands. This helps make it clear which arguments apply to which commands. The two common commands are below, see https://csharpier.com/docs/CLI for more details.

dotnet csharpier format .
dotnet csharpier check .

Changing the tool command to csharpier. Changing the assembly/exe to CSharpier #1418

Prior to 1.0.0 the tool command was dotnet-csharpier and assembly/exe were named dotnet_csharpier. The tool command name was changed to just csharpier

• Running a local tool remains the same dotnet csharpier --version

... (truncated)

Changelog

Sourced from csharpier's changelog.

1.0.1

What's Changed

CSharpier's support for .gitignore is causing performance issues #1584

The support for .gitignore has some major performance problems when there are a large number of .gitignore files and/or ignore rules. The feature has been disabled for now until it can be fixed.

CSharpier.MsBuild issues #1586

CSharpier.MsBuild was not properly logging errors when performing a formatting check. This would result in the build passing when files were not formatted.
Setting CSharpier_LogLevel was passing an invalid parameter of --loglevel to CSharpier, resulting in a build failure

Full Changelog: belav/csharpier@1.0.0...1.0.1

1.0.0

Major Changes

Support for formatting XML #819

CSharpier now formats xml files by default. It will try to format ".csproj", ".props", ".targets", ".xml", ".config" as if they were xml.
If a file is not valid xml it will be treated as a warning.
The default indent size is 2 instead of 4

Performance Improvements

@​TimothyMakkison put a lot of effort into improving the performance of CSharpier. These benchmark numbers show drastic improvement for both speed and memory usage.

Baseline

| Method                        | Mean     | Error   | StdDev  | Median   | Gen0       | Gen1      | Gen2      | Allocated |
|------------------------------ |---------:|--------:|--------:|---------:|-----------:|----------:|----------:|----------:|
| Default_CodeFormatter_Tests   | 233.3 ms | 4.63 ms | 8.23 ms | 229.7 ms | 11000.0000 | 4000.0000 | 1000.0000 | 101.41 MB |
| Default_CodeFormatter_Complex | 433.7 ms | 8.53 ms | 7.56 ms | 433.4 ms | 20000.0000 | 5000.0000 | 1000.0000 | 182.44 MB |

After Improvements

| Method                        | Mean      | Error    | StdDev   | Gen0      | Gen1      | Allocated |
|------------------------------ |----------:|---------:|---------:|----------:|----------:|----------:|
| Default_CodeFormatter_Tests   |  64.72 ms | 0.548 ms | 0.512 ms | 1666.6667 | 1000.0000 |  18.33 MB |
| Default_CodeFormatter_Complex | 137.83 ms | 2.730 ms | 4.708 ms | 3000.0000 | 1000.0000 |  30.78 MB |

Breaking Changes

ConfigurationFile - rename TabWidth to IndentSize #1377

In order to get consistency between an .editorconfig and .csharpierconfig the option TabWidth has been renamed to IndentSize. This is also a more accurate name considering by default indentation is done with spaces and not tabs.

Rework the CLI to use commands and arguments. #1321

The CLI has been reworked to use commands. This helps make it clear which arguments apply to which commands. The two common commands are below, see https://csharpier.com/docs/CLI for more details.

dotnet csharpier format .
dotnet csharpier check .

Changing the tool command to csharpier. Changing the assembly/exe to CSharpier #1418

Prior to 1.0.0 the tool command was dotnet-csharpier and assembly/exe were named dotnet_csharpier. The tool command name was changed to just csharpier

• Running a local tool remains the same dotnet csharpier --version
• Running a global tool is changed to csharpier --version

... (truncated)

Commits

• 4886792 Releasing 1.0.1 (#1592)
• 833d293 Fixing issue with msbuild still passing --loglevel (#1590)
• e5d8f01 The support for gitignore kills performance and there isn't a straightforward...
• c9231f3 fix command in readme (#1583)
• 4b30a17 Getting warnings turned on that get things consistent with what the p… (#1578)
• e36bd87 Use 1.0.0
• b85b095 fix changelog
• 165b680 tweak website
• 00d0df3 fix playground deploy
• d7d791e Releasing 1.0.0 (#1576)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Reviewers

The following users could not be added as reviewers: guibranco. Either the username does not exist or it does not have the correct permissions to be added as a reviewer.

Assignees

The following users could not be added as assignees: guibranco. Either the username does not exist or it does not have the correct permissions to be added as an assignee.

Labels

The following labels could not be found: .NET, dependencies, nuget, packages. Please create them before Dependabot can add them to a pull request.

Please fix the above issues or remove invalid values from dependabot.yml.

[github-actions]

Infisical secrets check: ✅ No secrets leaked!

💻 Scan logs

Update Required: Your current package installation script is outdated and will no longer receive updates.
Please update to the new installation script which can be found here https://infisical.com/docs/cli/overview#installation debian section

A new release of infisical is available: 0.38.0 -> 0.40.2

To update, run: sudo apt-get update && sudo apt-get install infisical

4:36AM INF scanning for exposed secrets...
4:36AM INF 7 commits scanned.
4:36AM INF scan completed in 75.5ms
4:36AM INF no leaks found