🌟 FZ nRF24 Jammer 🌟

Welcome to the FZ nRF24 Jammer repository! 🎉 Dive into the world of RF interference with this project based on the Flipper Zero and NRF24.

📚 Table of Contents

• 🚀 What Can You Do with This?
• 📋 List of Components
• 🧑‍🔧 Let's Get Started with Soldering!
• 📥 Installing App
• 🎮 App Control
• 🎉 Final Outcome
• 🙏 Acknowledgments
• ❤️ Support the project
• 🌐 Follow Me for Updates

---

🚀 What Can You Do with This?

This jammer is based on the Flipper Zero integrated with the NRF24 module. Thanks to its capabilities, you can effectively suppress signals from various technologies, including:

• Bluetooth 🔊
• BLE 📱
• Drones 🚁
• Wi-Fi 📶
• Zigbee📡

---

📋 List of Components

To bring this project to life, you will need the following components:

1. NRF24L01+PA+LNA module 🛠️
2. 16V capacitor rated at 100µF 🔋
3. Step Down Module AMS1117 3.3V

---

🧑‍🔧 Let's Get Started with Soldering!

One nRF24

HSPI Connection

nRF24	Flipper Zero GPIO
CE	B2
CSN	A4
SCK	B3
MOSI	A7
MISO	A6
IRQ

Power Supply Connection

AMS1117	Flipper Zero GPIO
VIN	5V
GND	GND

nRF24	AMS1117	capacitor
VCC	OUT	+
GND	GND	-

Two nRF24

HSPI Connection

nRF24	Flipper Zero GPIO
CE	B2
CSN	A4
SCK	B3
MOSI	A7
MISO	A6
IRQ

VSPI Connection

nRF24	Flipper Zero GPIO
CE	C3
CSN	C0
SCK	B3
MOSI	A7
MISO	A6
IRQ

Power Supply Connection

AMS1117	Flipper Zero GPIO
VIN	5V
GND	GND

nRF24	AMS1117	capacitor
VCC	OUT	+
GND	GND	-

In both configurations (HSPI and VSPI), the same SCK, MOSI, and MISO pins are used. This is not a mistake—SPI interfaces can share clock and data lines, while proper operation is ensured by separate control signals (CSN and CE)

Anyone who built the device before version 1.4.0, please add the AMS1117 module to your circuit, without it the nrf24 does not work correctly

---

📥 Installing App

1. Download the app from the releases section that corresponds to your firmware.
2. Install qFlipper
3. In qFlipper, go to the "File manager" section, and transfer the application downloaded from release to a convenient location on Flipper Zero

---

🎮 App Control

📋 Menu Navigation

• Up or Right button short press → Next menu item
• Down or Left button short press → Previous menu item
• OK button short press → Select menu item
• Back button short press → Exiting the app

📡 Misc Jammer

• Up button short press → Channel +1
• Up button long press → Continuous channel +1 (every 100ms)
• Up button double press → channel +10
• Up button triple press → channel +100
• Down button short press → Channel -1
• Down button long press → Continuous channel -1 (every 100ms)
• Down button double press → channel -10
• Down button triple press → channel -100
• Right button short press → Switch jamming mode
• Left button short press → Switch jamming mode
• OK button short press → Select channel
• Back button short press → Back to the last selected subject

Back button short press → stops active attacks

---

🎉 Final Outcome

App Appearance

Normal Spectrum

Bluetooth Jam Spectrum

Drone Jam Spectrum

Wi-Fi Jam Spectrum

BLE Jam Spectrum

Zigbee Jam Spectrum

---

🙏 Acknowledgments

• huuck - original author of the FlipperZeroNRFJammer

---

❤️ Support the project

If you would like to support this project, please consider starring the repository or following me! If you appreciate the hard work that went into this, buying me a cup of coffee would keep me fueled! ☕

BTC Address: bc1qvul4mlxxw5h2hnt8knnxdrxuwgpf4styyk20tm

ETH Address: 0x5c54eAb2acFE1c6C866FB4b050d8B69CfB1138Af

LTC Address: LbdzCsYbxuD341raar6Cg1yKavaDq7fjuV

XRP Address: rKLLPzoBGfqY3pAQPwTFPRYaWjpHSwHNDw

ADA Address: addr1qyz2aku0ucmxqnl60lza23lkx2xha8zmxz9wqxnrtvpjysgy4mdcle3kvp8l5l7964rlvv5d06w9kvy2uqdxxkcryfqs7pajev

DOGE Address: DBzAvD62yQUkP4Cb7C5LuFYQEierF3D3oG

Every donation is greatly appreciated and contributes to the ongoing development of this project!

---

🌐 Follow Me for Updates

Stay connected to receive the latest updates: