Native Compiler: Testing

Raspberry Pi Native Compiler Toolchain Testing 🔬

After successful Native Toolchain Binary installation, you can easily test/cross-check/verify those binaries as follows:

---

Note::bulb: These instructions are exclusively for GCC Native Compiler version 9.1.0 but will work with all compiler versions available with this project.

---

Try following commands in your terminal:

Tip:bulb:: 'Right-Click' select 'Open image in new tab' to see the full-size image.

• Test GCC Support with gcc-9.1.0 -v command, check if the output is similar as follows:

• Test G++ Support with g++-9.1.0 -v command, check if the output is similar as follows:

• Test GFORTRAN Support with gfortran-9.1.0 -v command, check if the output is similar as follows: