This is a reference implementation of the FDO v1.1 Proposed Standard published by the FIDO Alliance. It provides production-ready implementation for the protocol defined by the specification. It also provides example implementation for different components to demonstrate end-to-end execution of the protocol. Appropriate security measures should be taken while deploying the example implementation for these components.
- Ubuntu (20.04, 22.04) / RHEL (8.4, 8.6) / Debian 11.4. +
- Maven 3.6.3.
- Java 17.
- Haveged.
- Docker engine (minimum 20.10.10, Supported till version 20.10.21) / Podman engine (For RHEL) 3.4.2+
- Docker-compose (minimum version 1.29.2) / Podman-compose 1.0.3(For RHEL)
+Supported list of Host operating systems.
NOTE: FDO service require strong random number generation in order to perform the required cryptographic functions. The FDO servers will hang on startup waiting for sufficient entropy unless the system continuously supplied random data.
sudo apt-get install -y havegedwill ensure the system fdo services are running on have sufficient entropy.
For the instructions in this document, <fdo-pri-src> refers to the path of the FDO PRI folder 'pri-fidoiot'.
FDO PRI source code is organized into the following sub-folders.
-
component-samples: It contains all the normative and non-normative server and client implementation with all specifications listed in the base profile. -
protocol: It contains implementations related to protocol message processing.
FDO PRI source is written in Java 17 and uses the Apache Maven* software.
The list of ports that are used for unit tests and sample code:
| Port | Description |
|---|---|
| 8038 | manufacturer https port |
| 8039 | manufacturer http port |
| 8040 | rv http port |
| 8041 | rv https port |
| 8042 | owner http port |
| 8043 | owner https port |
| 3306 | PRI Service Database port |
| 8070 | reseller http port |
| 8072 | reseller https port |
| 8080 | aio http port |
| 8082 | aio H2 Console port |
| 8083 | manufacturer H2 Console port |
| 8084 | rv H2 Console port |
| 8085 | owner H2 Console port |
| 8073 | reseller H2 Console port |
| 8443 | aio https port |
Use the following commands to build FDO PRI source.
$ cd <fdo-pri-src>
$ mvn clean install
or FDO PRI source can be built using docker container. REFER
The build creates artifacts which will be used in the rest of this guide.
The runnable artifacts can be found in <fdo-pri-src>/component-samples/demo/.
NOTE: Export the following variable JDK_JAVA_OPTIONS="--add-opens java.base/java.lang=ALL-UNNAMED", if you are facing ClassFormatError exception while building using maven.
Credentials are defined in the <fdo-pri-src>/component-sample/demo/{component}/service.env for each service and will be made available as environment variables to each docker/podman container.
aio/service.env manufacturer/service.env owner/service.env reseller/service.env rv/service.env
The following passwords are defined in each service.env:
| Environment Variable | Description |
|---|---|
| db_user | database user account. |
| db_password | database password |
| api_password | defines the DIGEST REST API password |
| encrypt_password | keystore encryption password |
| ssl_password | Https/web server keystore password |
| user-cert | File containing Client keypair (mTLS) |
| ssl-ca | File containing the CA certificate of Server (mTLS) |
| api_user | Field containing Client's certificate details (mTLS) |
| useSSL | Boolean value specifying SSL connection with Database |
| requireSSL | Boolean value specifying SSL connection with Hibernate ORM |
Keystores containing private keys can be stored in the database - <fdo-pri-src>/component-sample/demo/{component}/app-data/emdb.mv.db
as well as in the mounted file system. During runtime, the deployer can decide the mode of Keystore IO by activating the required worker class.
keys_gen.sh can be used to generate random passwords for each service.env.
NOTE: Changing the database password after the H2 database has been created requires the database file to be deleted and recreated.
-
Generating demo certificate authority KeyPair and certificate
bash demo_ca.sh
NOTE: Configure the properties of
demo-CAby updatingroot-ca.conf. -
Generating Server and Client Keypair and certificates.
bash web_csr_req.sh bash user_csr_req.sh
NOTE: Both Server and Client certificates are signed by the previously generated demo-CA. Moreover, we can configure the properties of Server and Client certificates by updating
web-server.confandclient.confrespectively. Learn how to configure Server and Client Certificates. -
Running keys_gen.sh will generate random passwords for the all http servers and creates
secretsfolder containing all the required.pemfiles of Client, CA and Server component.$ cd <fdo-pri-src>/component-samples/demo/scripts $ ./keys_gen.shA message "Key generation completed." will be displayed on the console.
Credentials will be stored in the
secretsdirectory within<fdo-pri-src>/component-sample/demo/scripts.NOTE: Execute the following command to add hosted rendezvous certificates to the java client trust stores.
$ echo | openssl s_client -proxy ${https_proxy_host}:${https_proxy_port} -showcerts -connect fdorv.com:443 2>/dev/null | sed -n '/-----BEGIN CERTIFICATE-----/, /-----END CERTIFICATE-----/p' >> ./secrets/ca-cert.pem -
Copy both
secrets/andservice.envfile from<fdo-pri-src>/component-sample/demo/scriptsfolder to the individual components.NOTE: Don't replace
service.envpresent in the database component with generatedservice.envinscriptsfolder.$ cd <fdo-pri-src>/component-samples/demo/scripts $ cp -r ./secrets/. ../<component> $ cp service.env ../<component>NOTE: Component refers to the individual FDO services like aio, manufacturer, rv , owner and reseller.
NOTE: Docker secrets are only available to swarm services, not to standalone containers. To use this feature, consider adapting your container to run as a service. Stateful containers can typically run with a scale of 1 without changing the container code.
NOTE: Make sure to clean
api-user.pemof the owner component at<fdo-pri-src>/component-samples/demo/owner/secrets/and restart owner service, if connections to the external Rendezvous service are failing. With certificates present inapi-user.pemthe owner component tries to perform an mTLS connection with the external Rendezvous component.
When the http server starts for the first time it will generate a self-signed certificate for https protocol.
The subject name of the self-signed certificate is defined in the web-server.conf and client.conf.
Uncomment subjectAltName and allowed list of IP and DNS in [alt_names] section. Example:
#[ req_ext ]
subjectAltName = @alt_names
[ alt_names ]
#Replace or add new DNS and IP entries with the ones required by the HTTPs/Web Service.
DNS.1 = www.example.com
DNS.2 = test.example.com
DNS.3 = mail.example.com
DNS.4 = www.example.net
IP.1 = 127.0.0.1
IP.2 = 200.200.200.200
IP.3 = 2001:DB8::1
NOTE: Self-signed certificates created using the script is not recommended for use in production environments.
-
Copy generated
secrets/folder to<fdo-pri-src>/component-sample/demo/dbfolder. Generate secrets -
Start the Database service
cd <fdo-pri-src>/component-samples/demo/db
docker-compose up --build -d/ podman-compose up --build -dNOTE: By default, Database uses mTLS connection for jdbc. MariaDB* is used as the default database. For non-mTLS jdbc connection, set use_ssl and require_ssl property to false in service.yml of individual services.
NOTE: Follow the steps to Enable embedded H2 database
To start the server as a docker/podman container.
$ cd <fdo-pri-src>/component-samples/demo/aio
$ docker-compose up --build -d / podman-compose up --build -d
To start the server as a standalone java application.
$ cd <fdo-pri-src>/component-samples/demo/aio
$ java -jar aio.jar
The server will listen for FDO PRI http & https messages on ports 8080 and 8443 respectively.
The all-in-one demo supports all FDO protocols in a single service by default.
To start the server as a docker/podman container.
$ cd <fdo-pri-src>/component-samples/demo/rv
$ docker-compose up --build -d/ podman-compose up --build -d
To start the server as a standalone java application.
$ cd <fdo-pri-src>/component-samples/demo/rv
$ java -jar aio.jar
The server will listen for FDO PRI HTTP & HTTPS messages on port 8040 and 8041 respectively.
$ cd <fdo-pri-src>/component-samples/demo/owner
$ docker-compose up --build -d/ podman-compose up --build -d
To start the server as a standalone java application.
$ cd <fdo-pri-src>/component-samples/demo/owner
$ java -jar aio.jar
The server will listen for FDO PRI HTTP & HTTPS messages on port 8042 and 8043 respectively.
$ cd <fdo-pri-src>/component-samples/demo/manufacturer
$ docker-compose up --build -d/ podman-compose up --build -d
To start the server as a standalone java application.
$ cd <fdo-pri-src>/component-samples/demo/manufacturer
$ java -jar aio.jar
The server will listen for FDO PRI HTTP & HTTPS messages on port 8039 and 8038 respectively.
NOTE: By default the device is configured to run with the All-In-One (AIO) ports. You must edit the service.yml in the demo device directory to run with the manufacturer demo.
$ cd <fdo-pri-src>/component-samples/demo/device
$ docker-compose up --build -dTo start the Client as a standalone java application.
$ cd <fdo-pri-src>/component-samples/demo/device
$ java -jar device.jar
Running the device for the first time will result in device keys being generated and the device keys are stored in the app-data directory.
Once device keys are generated the device will run the DI protocol and store the DI credentials in a file called credentials.bin.
Running device for a second time will result in the device performing TO1/TO2 protocols.
Deleting the credentials.bin file will force the device to re-run DI protocol.
<fdo-pri-src>/component-samples/demo/device/service.yml contains the configuration of the device.
Before running the device for the first time start the demo aio server.
Run the demo device
As auto injection of ownership voucher is enabled in AIO by default; the ownership voucher is extended and stored in ONBOARDING_CONFIG table and the device is ready for TO1/2.
-
Update
WEB-INF/web.xmlto support Digest authentication<security-constraint> <web-resource-collection> <web-resource-name>apis</web-resource-name> <url-pattern>/api/v1/*</url-pattern> </web-resource-collection> <auth-constraint> <role-name>api</role-name> </auth-constraint> <user-data-constraint> <transport-guarantee>NONE</transport-guarantee> </user-data-constraint> </security-constraint> <login-config> <auth-method>DIGEST</auth-method> </login-config> -
Update
{server.api.user}and{server.api.password}indemo/<component>/tomcat-users.xmlfile.
Before running the device for the first time start the demo manufacturer.
Use the following REST api to specify the rendezvous instructions for demo rv server.
POST https://host.docker.internal:8038/api/v1/rvinfo (or http://host.docker.internal:8039/api/v1/rvinfo)
The post body content-type header text/plain
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the manufacturer's service.env or can use CLIENT-CERT AUTH (mTLS).
POST content
[[[5,"host.docker.internal"],[3,8041],[12,2],[2,"127.0.0.1"],[4,8041]]]
Change the di-url: http://host.docker.internal:8080 in the demo device service.yml to di-url: http://host.docker.internal:8039
After Running the device the successful output would be as follows:
$ cd <fdo-pri-src>/component-samples/demo/device
$ java -jar device.jar
...
13:50:21.846 [INFO ] Type 13 []
13:50:21.850 [INFO ] Starting Fdo Completed
Next get the owners public key by starting the demo owner service and use the following REST API.
GET https://host.docker.internal:8043/api/v1/certificate?alias=SECP256R1 (or http://host.docker.internal:8042/api/v1/certificate?alias=SECP256R1)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
Response body will be the Owner's certificate in PEM format
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
For EC384 based vouchers use the following API:
GET https://host.docker.internal:8043/api/v1/certificate?alias=SECP384R1 (or http://host.docker.internal:8042/api/v1/certificate?alias=SECP384R1)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
Result body will be the owners certificate in PEM format
REFER for the other supported attestation type.
Next, collect the serial number of the last manufactured voucher
GET https://host.docker.internal:8038/api/v1/deviceinfo/{seconds} (or http://host.docker.internal:8039/api/v1/deviceinfo/100000)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the manufacturer's service.env or can use CLIENT-CERT AUTH (mTLS).
Result will contain the device info
[{"serial_no":"43FF320A","timestamp":"2022-02-18 21:50:21.838","uuid":"24275cd7-f9f5-4d34-a2a5-e233ac38db6c"}]
Post the PEM Certificate obtained form the owner to the manufacturer to get the ownership voucher transferred to the owner. POST https://host.docker.internal:8038/api/v1/mfg/vouchers/43FF320A(or http://host.docker.internal:8039api/v1/mfg/vouchers/43FF320A)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the manufacturer's service.env or can use CLIENT-CERT AUTH (mTLS).
POST content-type text\plain
In the request body add owner's certificate.
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
Response will contain the ownership voucher
-----BEGIN OWNERSHIP VOUCHER-----
-----END OWNERSHIP VOUCHER-----
Post the extended ownership found obtained from the manufacturer to the owner POST https://host.docker.internal:8043/api/v1/owner/vouchers (or http://host.docker.internal:8042/api/v1/owner/vouchers)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
POST content-type text\plain
In the request body add extended ownership voucher
-----BEGIN OWNERSHIP VOUCHER-----
-----END OWNERSHIP VOUCHER-----
Response body be the uuid of the voucher Eg: 24275cd7-f9f5-4d34-a2a5-e233ac38db6c
Configure the Owners TO2 address using the following API:
POST https://host.docker.internal:8043/api/v1/owner/redirect (or http://host.docker.internal:8042/api/v1/owner/redirect)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
POST content-type text\plain
In the request body add Owner T02RedirectAddress.
[[null,"host.docker.internal",8043,5]]
Response 200 OK
Trigger owner to perform To0 with the voucher and post the extended ownership found obtained from the manufacturer to the owner
GET https://host.docker.internal:8043/api/v1/to0/24275cd7-f9f5-4d34-a2a5-e233ac38db6c (or http://host.docker.internal:8042/api/v1/to0/24275cd7-f9f5-4d34-a2a5-e233ac38db6c)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
Response 200 OK
Use the following API to configure a service info package. POST https://host.docker.internal:8043/api/v1/owner/svi (or http://host.docker.internal:8042/api/v1/owner/svi)
For authorization, users can use DIGEST AUTH with "apiUser" and api_password as defined in the owner's service.env or can use CLIENT-CERT AUTH (mTLS).
POST content
[
{"filedesc" : "setup.sh", "resource" : "https://google.com"},
{"exec" : ["sh","setup.sh"] }
]
Response 200 OK
Now run the device again to onboard the device
$ cd <fdo-pri-src>/component-samples/demo/device
$ java -jar device.jar