Skip to content

danmcd/rfe

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

17 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Requests for Enhancement

Requests for Discussion have allowed for technical thinking to be formally written down over a wide range of subjects. Their broad subject matter is not accidental: RFDs are intentionally informal in their subject and structure, with the belief that it is better to write things down than to refuse them in the name of a foolish consistency. That said, a subcategory has emerged that merits a distinction: RFDs that don't really discuss how something is designed but rather what problem should be solved. Rather than describing the concrete plans on how something will be implemented, these are often subjective, representing (to a degree) the priorities of the author(s): the problem is important enough that it merits being written down -- but not (yet) at the point where the architecture has been seriously considered. As such, these documents are not requests for discussion on detailed design but rather requests for enhancement (RFEs).

RFEs are described in more detail in RFD 102; this repository contains their formalized embodiments. They are in the spirit of an RFD (and mechanically similar, though without any discussion of design or implementation) but thought of, conceived of, and catalogued separately.

RFEs

state RFE
predraft RFE 1 The Router Network Object for Triton
predraft RFE 2 The Remote Network Object

Contents of an RFE

An RFE is the request for additional functionality to the system, with the emphasis on requirements rather than design -- it is the "what" than the "how". RFEs should almost always result in the addition of user- or operator-visible abstraction, with the exception being an existing abstraction that is to be enhanced in some quantifiable way. A good RFE needs to answer two questions: what problem needs to be solved (and why?) and what defines success?

"What needs to be solved?"

There is an art to describing the problem that needs to be solved: too vague, and one runs the risk of putative solutions that don't actually solve the problem; too specific and the problem description drifts into a solution description. Ideally, the problem description should be abstract and yet still sufficiently concrete to constrain (but not overly constrain!) solutions.

"Why?"

Engineers are problem solvers -- and understanding why a problem needs to be solved very much helps to understand the implications in terms of what needs to be solved. Sometimes the "why" of a problem only helps to motivate its solution (or the engineer providing it!), but in some cases the "why" can shape the solution significantly -- or imply other problems that need to be solved.

"What defines success?"

It's important to know the least that can be done to be considered successful -- not because engineers are underachievers, of course, but rather to allow for an iterative course to be plotted. This is an exercise in defining the minimum viable product: at what point is the problem considered to be sufficiently solved to at least allow further feedback? Alternatively, it may be that emphasis is not on "minimum" but "viable": many pieces of software infrastructure require significant work to render something that is at all usable, and the emphasis may be on the high level of functionality required to meet even the lowest of expectations.

Mechanics of an RFE

To create a new RFE, you should do the following steps.

Allocate a new RFE number

Like RFDs, RFEs are numbered starting at 1, and then increase from there. When you start, you should allocate the next currently unused number. Note that if someone puts back to the repository before you, then you should just increase your number to the next available one. So, if the next RFE would be number 42, then you should make the directory 0042 and place it in the file 0042.md. Note, that while we use four digits in the directories and numbering, when referring to an RFE, you do not need to use the leading zeros.

$ mkdir -p rfd/0042
$ cp prototypes/prototype.md rfd/0042/README.md
$

Write the RFE

At this point, you should write up the RFE. Any files that end in *.md will automatically be rendered into HTML and any other assets in that directory will automatically be copied into the output directory.

To make them readable in a normal text editor, RFEs should have a default text width of 80 characters. Any other materials related to that RFE should be in the same directory.

RFE Metadata and State

The start of every RFE document needs a small amount of metadata based on the python-markdown2 metadata format, e.g.:

---
authors: Jared Dunn <[email protected]>, Nelson Bighetti <[email protected]>
state: draft
---

RFEs should have two pieces of metadata. The first is the authors, who should be listed with their name and e-mail address.

The second is the state, which should be one of the following:

  1. predraft
  2. draft
  3. publish
  4. abandoned

While an RFE is in the predraft state, it indicates that the work is not yet ready for serious contemplation, and the RFE is effectively a placeholder.

RFEs being actively written should be in the draft state. RFEs that are in the draft state should have an issue open to capture any questions. This issue should have the synopsis that indicates the RFE number and that its purpose is to discuss it (e.g., "RFE 42: Discussion"). When this is done, it is helpful to add metadata to the RFE that contains a link to a search for the issue:

discussion: https://github.com/joyent/rfd/issues?q=%22RFE+42%22

Once (or if) the RFE has converged, it should be updated to the publish state and this issue should be closed. (Note that just because something is in the publish state does not mean that it cannot be updated and corrected.)

If an RFE becomes no longer desired or is otherwise obviated or meaningless, it should be moved into the abandoned state.

Contributing

Contributions are welcome, you do not have to be a Joyent employee to submit an RFE or to comment on one. The discussions for RFEs can occur anywhere, but generally happen on the issues open for RFEs not yet in the publish state.

About

Requests for Enhancement

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published