New settings for Slic3r 0.9.8

Don't forget to change the temperature settings to the values for your
ecksbot

Slic3r/ecksbot001.ini

@@ -0,0 +1,99 @@
+# generated by Slic3r 0.9.8 on Wed Feb 27 14:13:39 2013
+bed_size = 200,200
+bed_temperature = 109
+bottom_solid_layers = 3
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = .45
+complete_objects = 0
+cooling = 
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M400\nM104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+external_perimeter_speed = 30
+extra_perimeters = 
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = .45
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.85
+fill_angle = 45
+fill_density = 0.2
+fill_pattern = honeycomb
+first_layer_bed_temperature = 100
+first_layer_extrusion_width = .45
+first_layer_height = 100%
+first_layer_speed = 80%
+first_layer_temperature = 240
+g0 = 0
+gap_fill_speed = 30
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = .45
+infill_speed = 60
+layer_gcode = 
+layer_height = 00.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.45
+only_retract_when_crossing_perimeters = 0
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = .45
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_center = 100,100
+randomize_start = 
+retract_before_travel = 2
+retract_length = 0.75
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 15
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 5
+solid_infill_every_layers = 0
+solid_infill_speed = 60
+start_gcode = G28 ; home all axes
+support_material = 0
+support_material_angle = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 245
+threads = 2
+toolchange_gcode = 
+top_solid_infill_speed = 60
+top_solid_layers = 3
+travel_speed = 150
+use_relative_e_distances = 0
+vibration_limit = 0
+z_offset = 0