Skip to content

flashbots/mempool-dumpster

BranchesTags

Repository files navigation

Mempool Dumpster 🗑️♻️

Goreport status Test status

Archiving mempool transactions in Parquet and CSV format.

The data is freely available at https://mempool-dumpster.flashbots.net

Overview:

Available mempool transaction sources

  1. Generic EL nodes - go-ethereum, Infura, etc. (Websockets, using newPendingTransactions)
  2. Alchemy (Websockets, using alchemy_pendingTransactions, warning - burns a lot of credits)
  3. bloXroute (Websockets and gRPC)
  4. Chainbound Fiber (gRPC)
  5. Eden (Websockets and gRPC)

Note: Some sources send transactions that are already included on-chain, which are discarded (not added to archive or summary)

Output files

Daily files uploaded by mempool-dumpster (i.e. for September 2023):

  1. Parquet file with transaction metadata and raw transactions (~800MB/day, i.e. 2023-09-08.parquet)
  2. CSV file with only the transaction metadata (~100MB/day zipped, i.e. 2023-09-08.csv.zip)
  3. CSV file with details about when each transaction was received by any source (~100MB/day zipped, i.e. 2023-09-08_sourcelog.csv.zip)
  4. Summary in text format (~2kB, i.e. 2023-09-08_summary.txt)

Schema of output files

Parquet

$ clickhouse local -q "DESCRIBE TABLE 'transactions.parquet';"
timestamp               Nullable(DateTime64(3))
hash                    Nullable(String)
chainId                 Nullable(String)
txType                  Nullable(Int64)
from                    Nullable(String)
to                      Nullable(String)
value                   Nullable(String)
nonce                   Nullable(String)
gas                     Nullable(String)
gasPrice                Nullable(String)
gasTipCap               Nullable(String)
gasFeeCap               Nullable(String)
dataSize                Nullable(Int64)
data4Bytes              Nullable(String)
sources                 Array(Nullable(String))
includedAtBlockHeight   Nullable(Int64)
includedBlockTimestamp  Nullable(DateTime64(3))
inclusionDelayMs        Nullable(Int64)
rawTx                   Nullable(String)

CSV

Same as parquet, but without rawTx:

timestamp_ms,hash,chain_id,from,to,value,nonce,gas,gas_price,gas_tip_cap,gas_fee_cap,data_size,data_4bytes,sources,included_at_block_height,included_block_timestamp_ms,inclusion_delay_ms,tx_type

FAQ

  • When is the data uploaded? ... The data for the previous day is uploaded daily between UTC 4am and 4:30am.
  • What about transactions that are already included on-chain? ... Some sources send transactions even after they have been included on-chain. When a transaction is received, mempool-dumpster checks if it has been included already, and if so discards it from the transaction files (note: it is still added to the sourcelog).
  • What is inclusionDelayMs, and why can it be negative?
    • When a block is included on-chain, it includes a block.timestamp field.
    • inclusionDelayMs = (block.timestamp * 1000) - MempoolDumpster.receivedAtMs
    • Block builders set block.timestamp, typically to the beginning of the slot.
    • A slot is 12 seconds. If mempool dumpster receives a transaction in the middle of the slot (i.e. t=6), it could get included in the current slot. In this case, the builder would set the timestamp to t=0, i.e. 6 seconds before MD has seen the transaction. This scenario would result in a negative inclusionDelay value (i.e. inclusionDelayMs=-6000).
  • What are exclusive transactions? ... a transaction that was seen from no other source (transaction only provided by a single source). These transactions might include recycled transactions (which were already seen long ago but not included, and resent by a transaction source).
  • What does "XOF" stand for? ... XOF stands for "exclusive orderflow" (i.e. exclusive transactions).
  • What is a-pool? ... A-Pool is a regular geth node with some optimized peering settings, subscribed to over the network.
  • gRPC vs Websockets? ... bloXroute and Chainbound are connected with gRPC, all other sources are connected with Websockets (note that gRPC has a lower latency than WebSockets).

Working with Parquet

Apache Parquet is a column-oriented data file format designed for efficient data storage and retrieval. It provides efficient data compression and encoding schemes with enhanced performance to handle complex data in bulk (more here).

We recommend to use ClickHouse local (as well as DuckDB) to work with Parquet files, it makes it easy to run queries like:

# count rows
$ clickhouse local -q "SELECT count(*) FROM 'transactions.parquet' LIMIT 1;"

# count by transaction type
$ clickhouse local -q "SELECT txType, COUNT(txType) FROM 'transactions.parquet' GROUP BY txType;"

# show hash+rawTx from first entry
$ clickhouse local -q "SELECT hash,hex(rawTx) FROM 'transactions.parquet' LIMIT 1;"

# details of a particular hash
$ clickhouse local -q "SELECT timestamp,hash,from,to,hex(rawTx) FROM 'transactions.parquet' WHERE hash='0x152065ad73bcf63f68572f478e2dc6e826f1f434cb488b993e5956e6b7425eed';"

# all transactions seen from mempoolguru
$ clickhouse local -q "SELECT COUNT(*) FROM 'transactions.parquet' WHERE has(sources, 'mempoolguru');"

# all transactions that were seen by both mempoolguru and chainbound
$ clickhouse local -q "SELECT COUNT(*) FROM 'transactions.parquet' WHERE hasAll(sources, ['mempoolguru', 'local']);"

# exclusive transactions from bloxroute
$ clickhouse local -q "SELECT COUNT(*) FROM 'transactions.parquet' WHERE length(sources) == 1 AND sources[1] == 'bloxroute';"

# count of landed vs not-landed exclusive transactions, by source
$ clickhouse local -q "WITH includedBlockTimestamp!=0 as included SELECT sources[1], included, count(included) FROM 'out/out/transactions.parquet' WHERE length(sources) == 1 GROUP BY sources[1], included;"

# uniswap v2 transactions
$ clickhouse local -q "SELECT COUNT(*) FROM 'transactions.parquet' WHERE to='0x7a250d5630b4cf539739df2c5dacb4c659f2488d';"

# uniswap v2 transactions and separate by included/not-included
$ clickhouse local -q "WITH includedBlockTimestamp!=0 as included SELECT included, COUNT(included) FROM 'transactions.parquet' WHERE to='0x7a250d5630b4cf539739df2c5dacb4c659f2488d' GROUP BY included;"

# inclusion delay for uniswap v2 transactions (time between receiving and being included on-chain)
$ clickhouse local -q "WITH inclusionDelayMs/1000 as incdelay SELECT quantiles(0.5, 0.9, 0.99)(incdelay), avg(incdelay) as avg FROM 'transactions.parquet' WHERE to='0x7a250d5630b4cf539739df2c5dacb4c659f2488d' AND includedBlockTimestamp!=0;"

# count uniswap v2 contract methods
$ clickhouse local -q "SELECT data4Bytes, COUNT(data4Bytes) FROM 'transactions.parquet' WHERE to='0x7a250d5630b4cf539739df2c5dacb4c659f2488d' GROUP BY data4Bytes;"

See this post for more details: https://collective.flashbots.net/t/mempool-dumpster-a-free-mempool-transaction-archive/2401

Running the analyzer

You can easily run the included analyzer to create summaries like 2023-09-22_summary.txt:

  1. First, download the parquet and sourcelog files from https://mempool-dumpster.flashbots.net/ethereum/mainnet/2023-09
  2. Then run the analyzer:
go run cmd/analyze/* \
    --out summary.txt \
    --input-parquet /mnt/data/mempool-dumpster/2023-09-22/2023-09-22.parquet \
    --input-sourcelog /mnt/data/mempool-dumpster/2023-09-22/2023-09-22_sourcelog.csv.zip

To speed things up, you can use the MAX environment variable to set a maximum number of transactions to process:

MAX=10000 go run cmd/analyze/* \
    --out summary.txt \
    --input-parquet /mnt/data/mempool-dumpster/2023-09-22/2023-09-22.parquet \
    --input-sourcelog /mnt/data/mempool-dumpster/2023-09-22/2023-09-22_sourcelog.csv.zip

Interesting analyses

  • Something interesting with inclusionDelay?
  • Trash transactions (invalid nonce, not enough sender funds)

Feel free to continue the conversation in the Flashbots Forum!

System architecture

  1. Collector: Connects to EL nodes and writes new mempool transactions and sourcelog to hourly CSV files. Multiple collector instances can run without colliding.
  2. Merger: Takes collector CSV files as input, de-duplicates, checks transaction inclusion status, sorts by timestamp and writes output files (Parquet, CSV and Summary).
  3. Analyzer: Analyzes sourcelog CSV files and produces summary report.
  4. Website: Website dev-mode as well as build + upload.

system diagram (https://excalidraw.com/#json=Jj2VXHWIN9TZqNOOVJiAk,UgZ_ui_aLZlnYUy6nBH5mw)

Getting started

Mempool Collector

  1. Subscribes to new pending transactions at various data sources
  2. Writes 3 files:
    1. Transactions CSV: timestamp_ms, hash, raw_tx (one file per hour by default)
    2. Sourcelog CSV: timestamp_ms, hash, source (one entry for every single transaction received by any source)
    3. Trash CSV: timestamp_ms, hash, source, reason, note (trash transactions received by any source, these are not added to the transactions CSV. currently only if already included in previous block)
  3. Note: the collector can store transactions repeatedly, and only the merger will properly deduplicate them later

Default filenames:

Transactions

  • Schema: <out_dir>/<date>/transactions/txs_<date>_<uid>.csv
  • Example: out/2023-08-07/transactions/txs_2023-08-07-10-00_collector1.csv

Sourcelog

  • Schema: <out_dir>/<date>/sourcelog/src_<date>_<uid>.csv
  • Example: out/2023-08-07/sourcelog/src_2023-08-07-10-00_collector1.csv

Trash

  • Schema: <out_dir>/<date>/trash/trash_<date>_<uid>.csv
  • Example: out/2023-08-07/trash/trash_2023-08-07-10-00_collector1.csv

Running the mempool collector:

# print help
go run cmd/collect/main.go -help

# Connect to ws://localhost:8546 and write CSVs into ./out
go run cmd/collect/main.go -out ./out

# Connect to multiple nodes
go run cmd/collect/main.go -out ./out -nodes ws://server1.com:8546,ws://server2.com:8546

Merger

  • Iterates over collector output directory / CSV files
  • Deduplicates transactions, sorts them by timestamp
go run cmd/merge/main.go -h

Architecture

General design goals

  • Keep it simple and stupid
  • Vendor-agnostic (main flow should work on any server, independent of a cloud provider)
  • Downtime-resilience to minimize any gaps in the archive
  • Multiple collector instances can run concurrently, without getting into each others way
  • Merger produces the final archive (based on the input of multiple collector outputs)
  • The final archive:
    • Includes (1) parquet file with transaction metadata, and (2) compressed file of raw transaction CSV files
    • Compatible with ClickHouse and S3 Select (Parquet using gzip compression)
    • Easily distributable as torrent

Collector

  • NodeConnection
    • One for each EL connection
    • New pending transactions are sent to TxProcessor via a channel
  • TxProcessor
    • Check if it already processed that tx
    • Store it in the output directory

Merger

Transaction RLP format

Stats libraries

Contributing

Install dependencies

go install mvdan.cc/gofumpt@latest
go install honnef.co/go/tools/cmd/staticcheck@latest
go install github.com/golangci/golangci-lint/cmd/golangci-lint@latest
go install github.com/daixiang0/gci@latest

Lint, test, format

make lint
make test
make fmt

See also

License

Maintainers

About

Dump all the mempool transactions 🗑️ ♻️ (in Parquet + CSV)

mempool-dumpster.flashbots.net

Resources

Readme

License

MIT license
Activity
Custom properties

Stars

215 stars

Watchers

22 watching

Forks

28 forks
Report repository

Releases

10 tags

Contributors 6

Languages