Same as version 2 with more ease of use in deployment.
You can launch the GUI from the terminal or run the exe in /dist
For more about FWCracker visit, https://github.com/odioski/FWCracker_v2
A few options...
Download the code:
git clone https://github.com/odioski/FWCracker_v3.git
Get PySerial and pyQt6
pip install pyserial pyQt6
Run FWCracker
python FWCracker.py
Download the code:
git clone https://github.com/odioski/FWCracker_v3.git
Navigate to /dist inside is FWCracker.exe
Download the code:
git clone https://github.com/odioski/FWCracker_v3.git
Run the FWCracker_v3_Installer located in /INSTALLER
Launch FWCracker from your Desktop
Download the code:
git clone https://github.com/odioski/FWCracker_v3.git
Download PyInstaller and pyQt6 if you don't already have those:
pip install pyinstaller pyQt6
Use Pyinstaller and the .spec:
pyinstaller FWCracker.spec
Inside /dist you'll find FWCracker.exe
FWCracker_v3 will install pyserial if not on the system.
If FWCracker can't find pyserial-ports you can add it to your PATH. From there, find your port in the Device Manager and launch.
As in previous versions you'll need a serial to hid keyboard emulator.
You can see what one looks like by visiting https://tinyurl.com/5xe4n4mn