Skip to content

otosky/home-ops

Repository files navigation

Home Operations

A fluxCD deployment repo for services I run in my homelab.

Inspiration

This is heavily inspired by the wonderful work done by the k8s-at-home community. Peep their discord!

Standing on the shoulder of giants:

Overview

💻 Hardware

If I didn't get it on Craigslist, it came from eBay.

Device Count OS Disk Size Data Disk Size NIC Operating System Purpose
Lenovo Thinkcentre m720q 2 500GB NVME Fedora Kubernetes Control Plane
Lenovo Thinkcentre m920q 1 500GB NVME Fedora Kubernetes Control Plane
Dell Optiplex 3070 SFF (9th-gen Intel i5) 3 250GB SSD 1x 1TB SSD; 1x 1TB NVME Mellanox ConnectX-3 10G Fedora Kubernetes Agent
Custom NAS (Fractal 304) 1 Mellanox ConnectX-3 10G Unraid NAS
Lenovo Thinkcentre m720q 1 VyOS Router
Brocade ICX6450 1 Switch
TP-Link EAP650 1 Wifi AP
Unifi Flex-Mini 2 Switch (per room)
RPI 4B w/ Hifiberry DAC2 Pro 1 Volumio

⚓ Kubernetes

Installation

A private repo with my ansible playbooks provision k3s atop baremetal Fedora 37-Server installs.

Someday I'll switch over to the flux-cluster-template - right now what I use is something of a messy bastardization of the techno-tim/k3s-ansible playbooks.

Storage

The cluster is mostly hyper-converged; block-storage is provisioned through Longhorn on dedicated SSD and NVME drives per worker node. A separate NAS runs Unraid for NFS, but that is solely for media storage.

Layout

This Git repository contains the following directories under kubernetes.

📁 kubernetes      # Kubernetes cluster defined as code
├─📁 bootstrap     # Flux installation
├─📁 flux          # Main Flux configuration of repository
└─📁 apps          # Apps deployed into my cluster grouped by namespace

Flux is continually syncing the state of this repository to the cluster and applying any changes found in the kustomizations within.

No kubectl apply or helm install|upgrade for me. The flux controllers on the cluster do all the work. 💪