Merge pull request #336 from iNavFlight/development

v1.7.2

.github/ISSUE_TEMPLATE/Attempt_to_call_a_nil_value.md

@@ -6,19 +6,23 @@ labels: support
 assignees: teckel12
 ---
 
-If you're getting an `Attempt to call a nil value` error, it means you're out of memory on your transmitter.  The Taranis series has very little free memory to work with for Lua scripts, so this error is quite common.  But, there are a few things that typically cause this error which are listed below:
+If you're getting an `Attempt to call a nil value` error, it either means you don't have the `luac` build option checked for your OpenTX/JumperTX firmware or you're out of memory on your transmitter.  The Taranis series has very little free memory to work with for Lua scripts, so this error is quite common.  There's a few things that typically cause this error which are listed below:
 
-1) When installing Lua Telemetry, be sure to download the latest LuaTelemetry.zip linked here:
+1) Be sure the OpenTX/JumperTX firmware on your transmitter includes the `luac` build option, video instructions linked here:
+
+https://youtu.be/nYeB0IXT-10?t=283
+
+2) When installing Lua Telemetry, be sure to download the latest LuaTelemetry.zip linked here:
 
 https://github.com/iNavFlight/LuaTelemetry/releases/latest
 
 Also, please see the following instructions for correct installation:
 
 https://github.com/iNavFlight/LuaTelemetry/wiki/Installation
 
-2) Another possible reason for this error is that you're trying to use other Lua scripts on the same model. While you can have multiple Lua scripts for the same model, there's not much memory to work with on the Taranis transmitters. For example, if you're trying to use the Betaflight Tx lua script as well as Lua Telemetry, you'll probably run out of memory.  If VTx control is desired, try using the OSD menu which allows you to change VTx settings right on the OSD.
+3) Another possible reason for this error is that you're trying to use other Lua scripts on the same model. While you can have multiple Lua scripts for the same model, there's not much memory to work with on the Taranis transmitters. For example, if you're trying to use the Betaflight Tx lua script as well as Lua Telemetry, you'll probably run out of memory.  If VTx control is desired, try using the OSD menu which allows you to change VTx settings right on the OSD.
 
-3) Too many unused models. Each model slot setup in your transmitter takes up valuable memory.  Many times models are backed up to tweak settings without deleting the backups when finished.  By deleting unused models, memory is freed that can be used for other things, like Lua scripts.
+4) Too many unused models. Each model slot setup in your transmitter takes up valuable memory.  Many times models are backed up to tweak settings without deleting the backups when finished.  By deleting unused models, memory is freed that can be used for other things, like Lua scripts.
 
 As this is a common issue that I've tried to cover in the Wiki, I would appreciate if you could let me know how the instructions could be improved to avoid any confusion.
 

.github/ISSUE_TEMPLATE/Not_enough_memory.md

@@ -6,7 +6,7 @@ labels: support
 assignees: teckel12
 ---
 
-If you're getting a `not enough memory error`, it means you're out of memory on your transmitter.  The Taranis series has very little free memory to work with for Lua scripts, so this error is quite common.  But, there are a few things that typically cause this error which are listed below:
+If you're getting a `not enough memory error`, it means you're out of memory on your transmitter.  The Taranis series has very little free memory to work with for Lua scripts, so this error is quite common.  There's a few things that typically cause this error which are listed below:
 
 1) When installing Lua Telemetry, be sure to download the latest LuaTelemetry.zip linked here:
 

README.md

@@ -1,4 +1,4 @@
-## INAV Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 - v1.7.1
+## INAV Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 - v1.7.2
 
 ### FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry on Taranis, Horus & Jumper T16 transmitters
 
@@ -8,10 +8,9 @@
 
 #### [Video of Lua Telemetry](https://youtu.be/YaUgywuT1YM)
 
-#### Classic view
+#### Horus/Jumper T16 view
 
-![sample](assets/iNavQX7.png "Classic view on Q X7 and X-Lite")  
-![sample](assets/iNavX9D.png "Classic view on Taranis X9D, X9D+ and X9E")
+![sample](assets/iNavHorus.png "View on Horus transmitters")
 
 #### Pilot (glass cockpit) view for fixed wing pilots
 
@@ -28,9 +27,10 @@
 ![sample](assets/iNavQX7alt.png "Altitude graph view on Q X7 and X-Lite")  
 ![sample](assets/iNavX9Dalt.png "Altitude graph view on Taranis X9D, X9D+ and X9E")
 
-#### Horus/Jumper T16 view
+#### Classic view
 
-![sample](assets/iNavHorus.png "View on Horus transmitters")
+![sample](assets/iNavQX7.png "Classic view on Q X7 and X-Lite")  
+![sample](assets/iNavX9D.png "Classic view on Taranis X9D, X9D+ and X9E")
 
 ## Features
 
@@ -46,6 +46,7 @@
 * Display and voice alerts for flight modes and flight mode modifiers (altitude hold, heading hold, home reset, etc.)
 * Voice notifications for % battery remaining (based on current), voltage low/critical, high altitude, lost GPS, ready to arm, armed, disarmed, etc.
 * GPS info: Satellites locked, GPS accuracy (HDOP), GPS altitude, GPS coordinates. Also logs the last GPS location (reviewed from the config menu)
+* Playback previous flights via telemetry log files, including fast forward, rewind, and pause features
 * Display of current/maximum: Altitude, Distance, Speed and Current
 * Display of current/minimum: Battery voltage, RSSI strength
 * Title display of model name, flight timer, transmitter voltage and receiver voltage
@@ -57,6 +58,7 @@
 
 * [OpenTX v2.2.2+](http://www.open-tx.org/) running on Taranis Q X7/Q X7S, X9D/X9D+, X9E, X9 Lite, X-Lite/X-Lite Pro, Horus X10/X10S or X12S (OpenTX v2.2.3+ is suggested)
 * Jumper T16 requires [JumperTX 2.2.3+](https://www.jumper.xyz/jumpertx-t16) (May 23, 2019 or after release)
+* The OpenTX/JumperTX firmware on your transmitter needs to [includes the `luac` build option](https://youtu.be/nYeB0IXT-10?t=283)
 * FrSky X, R9 or D series telemetry receiver: X4RSB, X8R, XSR, R-XSR, XSR-M, XSR-E, RX4R, RX6R, XM, XM+, R9, R9 Slim, R9 Slim+, R9 Mini, R9 MM, D8R-II plus, D8R-XP, D4R-II, etc. or any TBS Crossfire receiver: Micro, Nano, Diversity, etc.
 * [INAV v1.7.3+](https://github.com/iNavFlight/inav/releases) running on your flight controller (INAV v2.1.0+ is suggested for full functionality) - Also compatible with Betaflight (with reduced functionality)
 * GPS - If you're looking for a GPS module, I suggest the [Beitian BN-880](https://www.banggood.com/UBLOX-NEO-M8N-BN-880-Flight-Control-GPS-Module-Dual-Module-Compass-p-971082.html)
@@ -97,7 +99,7 @@
 * [Screen Description](https://github.com/iNavFlight/LuaTelemetry/wiki/Screen-Description)
 * [Configuration Settings](https://github.com/iNavFlight/LuaTelemetry/wiki/Configuration-Settings)
 * [Suggested Battery Settings](https://github.com/iNavFlight/LuaTelemetry/wiki/Suggested-Battery-Settings)
-* [Change Log - Release History](https://github.com/iNavFlight/LuaTelemetry/wiki/Change-Log)
+* [Playback Telemetry Logs](https://github.com/iNavFlight/LuaTelemetry/wiki/Playback-Telemetry-Log-Files)
 
 ## Support
 
@@ -108,5 +110,6 @@
 ## Other
 
 * [Upgrade to Development Build](https://github.com/iNavFlight/LuaTelemetry/wiki/Upgrade-to-Development-Build)
+* [Release History](https://github.com/iNavFlight/LuaTelemetry/wiki/Change-Log)
 * [Multilingual Support](https://github.com/iNavFlight/LuaTelemetry/wiki/Multilingual-Support)
 * [License](https://github.com/iNavFlight/LuaTelemetry/blob/master/LICENSE)

build

@@ -20,12 +20,16 @@ luac52 -s -o obj/lang_de.luac src/iNav/lang_de.lua
 luac52 -s -o obj/lang_es.luac src/iNav/lang_es.lua
 luac52 -s -o obj/lang_fr.luac src/iNav/lang_fr.lua
 luac52 -s -o obj/load.luac src/iNav/load.lua
+luac52 -s -o obj/log_c.luac src/iNav/log_c.lua
+luac52 -s -o obj/log_s.luac src/iNav/log_s.lua
+luac52 -s -o obj/log.luac src/iNav/log.lua
 luac52 -s -o obj/menu.luac src/iNav/menu.lua
 luac52 -s -o obj/modes.luac src/iNav/modes.lua
 luac52 -s -o obj/other.luac src/iNav/other.lua
 luac52 -s -o obj/pilot.luac src/iNav/pilot.lua
 luac52 -s -o obj/radar.luac src/iNav/radar.lua
 luac52 -s -o obj/reset.luac src/iNav/reset.lua
+luac52 -s -o obj/save.luac src/iNav/save.lua
 luac52 -s -o obj/view.luac src/iNav/view.lua
 
 rm -fR obj/