Skip to content
/ vrf-vyatta Public

Vyatta Virtual Routing and Forwarding extension using Network Namespace

Notifications You must be signed in to change notification settings

upa/vrf-vyatta

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

VRF-VYATTA

vrf-vyatta is vyatta CLI extension for enabling VRF using Linux network namespace. It enables that you can configure vrf in top level of configure mode. It uses Linux namespace. Protocol static, ospf, and ospfv3 processes can be run on a vrf instance. And only vlan interface can be attached into VRF.

vrf-vyatta requires alternative quagga and iproute2.

Install quagga

vrf-vyatta requires quagga software that is applied multi vtysh patch. The patch url is http://lists.quagga.net/pipermail/quagga-dev/2012-July/009627.html. This patch can be applied to only quagga release 0.99.21.

 % apt-get install -y libreadline-dev 
 % wget http://download.savannah.gnu.org/releases/quagga/quagga-0.99.21.tar.gz
 % tar zxvf quagga-0.99.21.tar.gz
 % cd quagga-0.99.21
 % patch -p1 < quagga-multi-vty.patch
 % ./configure --enable-vtysh --disable-ripd --disable-ripngd --disable-babeld --disable-watchquagga --disable-doc
 % make
 % make install
 % /usr/local/sbin/zebra --version
 lt-zebra version 0.99.21
 Copyright 1996-2005 Kunihiro Ishiguro, et al.

This quagga routing softwares (ospfd, ospf6d, zebra) are installed to /usr/local/sbin, and vtysh is installed to /usr/local/bin directory. Don't change these prefixes because they are hardcoded into vyatta cli extensions for VRF. Preinstalled quagga softwares are installed to /usr/*bin directories.

Install iproute2

Preinstalled iproute2 (iproute2-ss120801) on VC6.5 can not exec commands on network namespace. So please install new iproute2 (I have tested with iproute2-ss121211).

 % apt-get install -y pkg-config bison flex libdb-dev xtables-addons-source
 % wget https://www.kernel.org/pub/linux/utils/net/iproute2/iproute2-3.7.0.tar.gz
 % tar zxvf iproute2-3.7.0.tar.gz
 % cd iproute2-3.7.0
 % ./configure
 % make
 % make install
 % /sbin/ip -V
 ip utility, iproute2-ss121211

This ip command is installed to /sbin directory (original ip command is in /bin). This prefix is also used on cli extensions.

Install CLI Extension

 % sh install.sh 

install.sh installs vyatta cli extensions and some scripts. The prefix of extension scripts is xyatta.

Configuratin example

Content of VRF is linux network namespace. When new namespace is created, a quagga instance is executed on the namespace.

Configuration exapmle.

 vyatta@vrf1# show vrf 
  vrf hoge {
      interfaces {
          ethernet eth1 {
              vif 10 {
                  address 10.10.10.1/24
                  address 2001:db8::1/64
              }
          }
      }
      protocols {
          ospf {
              area 0.0.0.0 {
                  network 10.10.10.0/24
              }
          }
          ospfv3 {
              area 0.0.0.0 {
                  interface eth1.10
              }
          }
          static {
              route 192.168.0.0/24 {
                  next-hop 10.10.10.2 {
                  }
              }
          }
      }
  }
 [edit]
 vyatta@vrf1# 
 vyatta@vrf1# run show vrf hoge ip ospf neighbor 
 
     Neighbor ID Pri State           Dead Time Address         Interface            RXmtL RqstL DBsmL
 10.10.10.2        1 Full/DR           38.094s 10.10.10.2      eth1.10:10.10.10.1       0     0     0
 [edit]

And, veth type interface pairs between two VRFs (including default VRF) is supported. You can create veth pair under configure mode interfaces veth-pair vethX. a veth interface can be attached under VRF.

Configuration exapmle.

 vyatta@vrf1# show 
  interfaces {
      veth-pair veth0 {
          veth veth0a {
              vrf hoge
          }
      }
      vethernet veth0b {
          address 172.16.0.1/24
      }
  }
  protocols {
      ospf {
          area 0.0.0.0 {
              network 172.16.0.0/24
          }
      }
  }
  vrf hoge {
      interfaces {
          vethernet veth0a {
              address 172.16.0.2/24
          }
      }
      protocols {
          ospf {
              area 0.0.0.0 {
                  network 172.16.0.0/24
              }
          }
      }
  }
 [edit]
 upa@neito# run show ip ospf neighbor 
 
     Neighbor ID Pri State           Dead Time Address         Interface            RXmtL RqstL DBsmL
 172.16.31.1       1 Full/DR           38.961s 172.16.0.2      veth0b:172.16.0.1        0     0     0
 [edit]
 upa@neito# run show vrf hoge ip ospf neighbor 
 
     Neighbor ID Pri State           Dead Time Address         Interface            RXmtL RqstL DBsmL
 203.178.135.19    1 Full/Backup       30.933s 172.16.0.1      veth0a:172.16.0.2        0     0     0
 [edit]

vethXa and vethXb are auto generated when veth-pair vethX is defiend.

Todo

  • bgpd on VRF
  • some operational commands

Contact

[email protected]

if you found bugs, please let me know.

About

Vyatta Virtual Routing and Forwarding extension using Network Namespace

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published