How to upload marlin firmware
MKS RUMBA32 build and upload marlin2.0 can use platformio, how to do it? Please see the following tutorial.
- Press and hold the BOOT button, then use USB connect to the MKS RUMBA32. The motherboard enters DFU mode.
- We need to show STM32 BOOTLOADER installation failed
- Open Zadig.exe, set and install drive
- Install drive ok
- Open marlin2.0 project(need download mks github rumba32 path marlin firmware)
- Platformio.ini set as mks_rumba32 and configuration.h set board
- Build and upload marlin2.0 firmware
- First, upload firmware, MKS RUMBA32 board need enter DFU mode. Press and hold the BOOT button, then use USB connect to the MKS RUMBA32. The motherboard enters DFU mode.
- Second, upload firmware 7_build_upload
- Connect MKS MINI12864 V2.1 8_test_ok
- When after upload firmware, we look like this 9_usb_not_com
- We need update COM drive and use SSTM32 virtual serial port 10_install_stm32_drive
- After installing the STM32 virtual serial port, we need to manually update the COM 11_updatecom1 11_updatecom2 11_updatecom3 11_updatecom4 11_updatecom5
- Connet pronterface test 12_connet_pc_ok
- Copy firmware.bin file to update firmware bin file path 13_copy_firmware_bin
- Run Upload.bat(MKS RUMBA32 need enter DFU mode) 14_update_firmware_bin_flie
- Board power support DC12-24V input,please make sure that the positive and negative poles of the power supply are correct before powering on. otherwise, the motherboard may be damaged easily.
- Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it.
- For more product dynamic information and tutorial materials, you can always follow MKS's Facebook and GitHub and YouTube. Thank you!
