Issues

• Flaky test: src/cad/CadEditor.cupboard.test.tsx > inserts two cupboards, keeps one shelf hole through size/count changes, then reopens and undoes

  flaky-test
  plainoss/camNC#759 · Filter by author github-actions opened on Nov 11, 2026

• Flaky test: src/cad/CadEditor.studio.test.tsx > restores a cancelled studio sketch and its drawn line after Cancel

  flaky-test
  plainoss/camNC#750 · Filter by author Schibum opened on Nov 11, 2026

• Carving cut line can run off the board with no warning, then Plan fails with hundreds of errors

  bug
  plainoss/camNC#744 · Filter by author Schibum opened on Nov 11, 2026

• A frame cut into mitred pieces extrudes solid, its inside too

  bug
  plainoss/camNC#724 · Filter by author Schibum opened on Nov 11, 2026
  1

• Extruding a sketch drops a shape with a hole when the sketch has other shapes

  bug
  plainoss/camNC#713 · Filter by author Schibum opened on Nov 11, 2026
  1

• Rolled-back face sketch still draws in the 3D view after Roll to here

  bug
  plainoss/camNC#709 · Filter by author Schibum opened on Nov 11, 2026
  1

• Boards labels a mirrored copy "Part (mirrored)" while Parts lists its number

  bug
  plainoss/camNC#700 · Filter by author Schibum opened on Nov 11, 2026
  2

• Part Studio view cube label reads upside down in Bottom view

  bug
  plainoss/camNC#698 · Filter by author Schibum opened on Nov 11, 2026

• Flaky test: sketch/machine/edit-after-cut-keeps-boards

  flaky-test
  plainoss/camNC#664 · Filter by author github-actions opened on Nov 11, 2026
  3

• Flaky test: CadEditor.patternConsumedSource.test.tsx > patterns an explicitly selected consumed source while retaining its cut and physical membership

  flaky-test
  plainoss/camNC#594 · Filter by author Schibum opened on Nov 10, 2026
  1

• Flaky test: src/cad/CadEditor.studio.test.tsx > moves a part with a transform when Copy part is off, as the reference does by default, and edits the move from its step

  flaky-test
  plainoss/camNC#592 · Filter by author Schibum opened on Nov 10, 2026
  2

• Add cutter-sized corner relief to Cut parts and verify mortise fit

  plainoss/camNC#589 · Filter by author Schibum opened on Nov 10, 2026
  1

• Joined Add bodies lose copied machining pieces in legacy designs

  plainoss/camNC#588 · Filter by author Schibum opened on Nov 10, 2026
  1

• Design Assistant should default to physically robust furniture joints (two stool examples)

  bug
  plainoss/camNC#585 · Filter by author Schibum opened on Nov 10, 2026
  3

• Flaky test: studio/cupboard/selected-copy-target

  flaky-test
  plainoss/camNC#580 · Filter by author Schibum opened on Nov 10, 2026
  1

• Flaky test: src/cad/CadEditor.studio.test.tsx > sketches on a base plane picked before Sketch or Shift+S, as on one picked after it

  flaky-test
  plainoss/camNC#576 · Filter by author Schibum opened on Nov 10, 2026
  2

• Flaky test: src/cad/CadEditor.faceWorkflow.test.tsx > builds three parts with face sketches, then adds a face extrusion up to another face, retaining each manually orbited view

  flaky-test
  plainoss/camNC#575 · Filter by author Schibum opened on Nov 10, 2026
  1

• Follow-ups from CAM output review: first real cut and remaining checks

  enhancement
  plainoss/camNC#147 · Filter by author Schibum opened on Nov 6, 2026
  2